EarthWise SOLiC 200 User Instructions - Power Light
Power light
Green
The mains quality is good. Power is on
Red
The mains quality is poor, so the unit is in temporary
standby mode. This light is also used to highlight
faults or other undesirable conditions, such as
power limiting from overheating, sensor not
calibrated or system in standby.
Generating power light
Mode 1
Green
The solar PV installation is generating
power.
Mode 1
Red
The solar PV installation is not
generating power.
Mode 2
Green
Sufficient surplus power is available to
be supplied to the immersion heater.
Mode 2
Red
The house is drawing grid power - there
is minimal or no surplus power
available.
Mode 2
Flashing
red/
green
All available power is being supplied to
the immersion heater. No power is
being drawn from the grid.
Immersion power light
Green
Power is being supplied to the immersion
heater - presently fading up or down.
Off
No power is being provided
Flashing red
The immersion heater has been provided
with full power irrespective of any power
being generated.
Flashing green
The pause function has suspended heating
altogether.