Earthworks PM40T User Manual

Other manuals for PM40T: User Manual
Manual is about: Piano microphone system

Summary of PM40T

  • Page 1

    Printed in u.S.A..

  • Page 2

    Custom made in the u.S.A..

  • Page 3

    12 notes: congratulations on your purchase of the innovative earthworks touring pianomic™ system. We know that you will be thrilled with the results you will achieve using the touring pianomic™ system for both live performance and recording. Items enclosed with your new earthworks touring pianomic™ ...

  • Page 4

    2 assembling & disassembling the touring pianomic™ the pianomic™ system is quick and easy to install. Once you have initially set up the pianomic™ system you will be able to do it from that point on in just a few minutes. Here are some helpful guidelines: caution – the microphone heads and gooseneck...

  • Page 5

    Now you should be ready to use the pianomic™ system and achieve some impressive sonic results for recording or live performances. If you have any questions after reading and following the directions in this manual, please contact earthworks directly using the contact information on page 11 of this m...

  • Page 6

    The pianomic™ system provides the following benefits: • excellent overall piano sound with uniform level from all strings • superb sound with the piano lid up or down • tremendous gain before feedback • minimal leakage from other instruments surrounding the piano (with piano lid closed) • microphones...

  • Page 7

    11. With the pianomic™ placed in- side the piano and the microphones properly positioned you are ready to connect the pianomic™ cable to the electronics box via a 5-pin xlr con- nector. The back of the electronics box has two xlr-3 connectors that will connect the microphone outputs to the preamp in...

  • Page 8

    6 7 6. Once you have determined which placement will provide you with the abil- ity to have the microphone heads two to three inches in front of the dampers, you are ready to place the pianomic™ system inside the piano. With the bar fully extended and the clutch adjusted where there is still a littl...