Earzone EZ-200 Operation Manual - page 20
Chapter 4 EzCam installation and check list in case of malfunction
When the program starts, it messages “Camera may not be connected, or it’s not the
appropriate camera. Please connect the camera again” and no more execution.
- Please confirm the connection between EzCam camera and USB.
( No other camera other than EzCam can execute program.)
- Control panel
System
Hardware tab
Device manager
Imaging device
Check if EZ CAM is installed normally. If it is not installed, then please install the driver
again by the instruction in the manual chapter 2 , paragraph 3.
In the edit mode, after selecting contents link and recording , it is not recorded normally.
- Please check the connection of EzCam’s USB. Recoding is only available by internal
microphone built-in the EzCam.
- Control panel
System
Hardware tab
Device manager
Sound video and
game controller
Check if USB audio device is installed normally. If it is not installed,
then please install the driver again by the instruction in the manual chapter 2,
paragraph 3.
- Even though the USB audio device is installed normally if the recording is not available,
please check the volume settings of EzCam microphone. Control panel
Sound &
audio device
Voice tab
In the basic device of voice recordings, select USB2.0
Web Camera and then click volume button. Select proper volume in the new window of
volume adjustment, and all sound elimination shall not be checked.
Please do not modify or delete files in the contents route directory optionally.
- Modifying or Deleting file(s) from the standard contents route directory C:\program
files\EzCam\project\contents and/or the folder in which additional contents are saved
may cause trouble when contents are opened.
- Please be sure to add/modify/delete files by EzCam program.
Chapter 5 EzCam handling instruction
For preventing damage and for the safe use of EzCam camera, please follow below
instructions.
Do not use solution which contains methyl-alcohol to wipe the camera.
Wipe the camera body gently with soft cloth.
Be careful not to get particles or finger prints when you clean the camera lens.
Be careful not to wet the camera body.
Keep camera properly avoiding humid or dusty place.
Refrain to use camera under direct ray of light or near to heating source.
Use soft cloth or cotton swab for cleaning camera lens.
20