Easy-Flo Built-in Vacuums User Manual - Grounding Instructions
Page 10
www.easyfl o.com
Easy-Flo Vacuum Systems Ltd. -
(cont. from page 9)
10). Do not use system to pick up construction debris
- nails, drywall dust, etc. which may cause clog ups.
11). Service to your system must be completed by an
authorized Easy-Flo dealer.
12). To use the utility valve on the power unit
(applicable models only), push the rocker switch (On/
Off) on the side of the motor compartment. Make
sure the hose is connected to the utility valve before
turning the unit on. All power units are equipped
with a circuit breaker to protect the motor from over
heating.
13). Do not operate in an area where the temperature
is over 32° C / 90° F.
14). Make sure power unit is well ventilated, and the
area around it is clear of obstructions.
GROUNDING INSTRUCTIONS
This appliance is for use on a standard 120 volt
circuit, and has a ground plug that looks like the plug
illustrated in fi gure 1.1. Make sure the power unit is
connected to an outlet having the same confi guration
as the plug. No extension cord or adapter should be
used with this power unit. Do not cut off the ground
plug under any circumstances.
fi gure 1.1