Easy-Flo Built-in Vacuums User Manual - Mounting Instructions
Manual is about: Built-in Vacuums
of
11
www.easyfl o.com
Easy-Flo Vacuum Systems Ltd. -
Page 11
MOUNTING INSTRUCTIONS
1) Locate stud in wall.
2) Predrill two 1/8” holes into
stud one below the other 1/2”
apart.
3) Screw a 2” screw into each
hole until head almost touches
drywall. A penny should just be
able to slip in between screw
head and wall.
4) Screw metal/rubber vac rest
the specifi ed distance below the
top 2” screw using the shorter
screw provided.
5) Hang vacuum by slipping
bracket over screw head and
resting bottom against metal
rest.
NOTE: If vacuum is not stable
against wall, turn 2” screws
slightly tighter into wall.
2" x 4" stud
1/2" drywall
EE