Easylife EL6172 Instruction Manual - page 7
Play / pause mode
1. Press the “Play/Pause” button (18) to start playback, the first track of the first disc will be played and the play
indicator will appear on the LCD display (1).
2. Or press either the “ disc 1 ” , “ disc 2 ” , “ disc 3 ” button, the unit will play the disc inside the desire tray directly.
3. To interrupt, press the “Play/Pause” button (18) once, and the display will start flashing. Press again to release &
resume playback.
Stop mode
1. If Stop button (17) is pressed during play or pause mode, system will go to stop mode.
Skip mode (skip up
/skip down
)
1. During play or pause mode, if Skip up button (20) is pressed it will go to next track and display the track no. and
then remain in play or pause mode.
2. During play or pause mode, if Skip Down button (21) is pressed. It will go back to the beginning of the track,
original track no. is display and remain in play or pause mode.
3. After step 2, pressing skip down button (21) again will go to the previous track and remain in play or pause mode.
Search mode (search up
/search down )
1. During play mode, if search up button (20) is pressed & held for a few seconds it will start searching forward.
2. During play mode, if search down button (21) is pressed & held for few seconds It will start searching backwards.
Repeat play
This function allow you to repeat 1 single track, 1 single disc or all discs:-
Press the Repeat button (12) repeatedly to switch the function:-
REPEAT All DISC
REPEAT 1 DISC
REPEAT ONE
Note : Single track repeat function is possible in normal or programmed playback, repeat one disc or all discs is only
available in normal playback.
Random play
You can listen all the tracks of all available discs in a random order by this function
1. Press Random button (10) once, unit will play all discs randomly ; press again, unit will play 1 disc randomly.
2. Press “play/pause” button to start random playback.
3. All tracks of all discs or all tracks of 1 disc will be started playback in random order.
4. Press “random” button again to cancel random mode.
CD programming
Up to 60 tracks can be programmed to be played in any required order from one cd or all cds in the cd changer.
1. Set in CD mode.
2. Press the Mem/clk-adj. button (7)
3. Press the “
” button (9) to select the desired disc.
4. Press skip
or
button (20/21) to select the desired track.
5. Press the Mem/clk/adj. button (7) again to store the track in memory.
6. Repeat steps 2 to 4 to enter additional tracks
7. Press Play/Pause button (18) to start playback in order.
8. Press Stop button (17) to stop playback and press again to clear all programmed tracks.
Listing to tape
General operation
Stop / Eject key
Press to stop all deck operation. Press again to open the cassette door.
Fast forward key &
Press to start rapid tape winding in either forward or reverse
Fast rewind key
direction. Press stop / eject to stop.
Play key
Press to start playing tape.
Pause key
Press to stop tape operation temporarily. Press again to resume play.
Record key
Press together with play key to start tape recording.
(deck 1 only)
E-4