EasyRAID Q16PS-F4R3 Hardware User Manual - page 20
10
easyRAID Q16PS-F4R3 SAS Disk Array Systems
2
Ba
sic Co
nfigu
ra
tio
n –
M
a
king
Con
nection
s
Making Connections
After the required number of disks have been installed, external connections to the disk
array system must be made. This section describes how to make all of the necessary
connections.
Connecting the Host Interface
The disk array system has dual fibre channel interfaces. Refer to the following sections
to make host interface connections.
The easyRAID Q16PS-F4R3 has dual 4 Gbit fibre channel interfaces. Each interface can
be used with optical or copper transceivers and cables. Follow these instructions to make
optical connections.
1 Insert the LC Optical SFP transceiver (A) in to the easyRAID Q16PS-F4R3 FC
CH 2 (secondary fibre channel) at the rear of the disk array system.
2 Connect the optical cable (B) to the LC Optical SFP transceiver (A).
COM
UPS
A
B