EasyRAID Q16PS-F4R3 Hardware User Manual - page 28
Manual is about: 4G Fibre Channel to SAS Disk Array System
of
30
18
easyRAID Q16PS-F4R3 SAS Disk Array Systems
3
Ma
inten
ance
–
Rep
lacing a FAN mod
u
le
Replacing a FAN module
When one of the FAN module fails, the massage “FANx Fail” appears on the LCD panel,
where x refers to power supply 1, or 2, and an audible alert sounds.
1 Identify the FAN module that has failed, loosen the retaining screws, slide it out
of chassis.
2 Insert a new FAN module, tighten retaining screws.
Note
Turn off the audible alert by pressing the Up and Down function
buttons on the front panel twice simultaneously.
COM
UPS
COM
UPS