EasyRAID Q16PS-S3R3 Hardware User Manual - page 12

2

easyRAID Q16PS-S3R3 SAS Disk Array Systems

1 

 Syste

m

 Re

quir

e

m

ents –

VT100 Terminal Settings

Refer to the following table for a summary of VT100 terminal settings required to com-

municate with the disk array system. Refer to your system manual for instructions on 

setting up the VT100 terminal settings.

Ethernet settings

easyRAID Q16PS-S3R3 supports DHCP (Dynamic Host Configuration Protocol) to get 

a IP address or a default IP is 192.168.1.1; You could find it from LCD scrolling. easyR-

AID Q16PS-S3R3 had embedded CGI-based GUI (graphic user interface) management 

interface can be easily accessed through a web browser.

Item

Required Setting

Connection

 Serial Port (COM1 or COM2)

Protocol

 RS232 (Asynchronous)

Cabling

 Null Modem cable

Baud Rate

 115200

Data Bits

 8

Stop Bit

 1

Parity

 None