EasyRAID Q16PS-S3R3 Hardware User Manual - page 27

easyRAID Q16PS-S3R3 SAS Disk Array Systems

17

3 

 M

ain

te

na

n

ce –  

Up

gr

a

din

g Me

m

or

y

Upgrading Memory

The disk array system takes a single DDRII DIMM with a maximum capacity of 2 GB. 

Follow these instructions to upgrade the memory.

1 Loosen the screws holding the controller cage in place, slide the controller-cage 

out of the chassis.

2 Pull the DIMM retaining clips away from the DIMM; the DIMM springs out of the 

socket. Remove the DIMM.

3 Gently push the new DIMM into the socket, then push the corners of the DIMM 

down. The DIMM is secured by the DIMM retaining clips. Push the controller 

cage back in, lower the handle, and tighten the retaining screws.

Note

The DIMM module will fit in only one direction. Do not force the 

DIMM into place.

COM

UPS

COM

UPS