EasyRAID Q24P2-U4R4 Hardware manual - Preface

iv

easyRAID Q24P2-U4R4 Serial ATA II Disk Array System

Preface

 –

  Impo

rtan

t Safety 

Instru

ctio

ns, Car

e

 an

d Ha

ndlin

g

Placement Notes

• The disk array system LCD panel can be damaged by exposure to 

direct sunlight. Limit exposure to subdued or indirect sunlight only.

• The disk array system should be used only in clean environments 

that are free from airborne contaminants such as dust, dirt, and 

smoke. Excessive moisture or oil particles in the air can also hinder 

disk array system performance.

• To reduce the possibility of data errors caused by electromagnetic 

interference, locate the disk array system at least five feet away 

from electrical appliances and equipment that generates magnetic 

fields.

Power Supply Safety Notes

• To avoid electric shocks, do not use an extended power cord or an 

outlet that does not match the disk array system plug or leaves the 

plug exposed. 

• The disk array system has a 3-wire grounded plug. The third pin 

connects to ground; do not remove it. 

• If the power cord or plug is damaged or worn, unplug it immediately 

and contact a qualified service technician for maintenance.

• To avoid fire or electric shocks, do not overload electric power out-

lets.

CAUTION : MULTIPLE POWER SOURCES

Disconnect all AC power cords to completely power from the unit

CAUTION

Risk of explosion if battery is replaced by an incorrect type.

Dispose of used batteries according to the instructions.

CAUTION

The thumbscrews on the rear surface shall be secured by the screw-

driver, which cannot be loosened by bare hands to prevent the uninten-

tional access to the hazardous parts inside the equipment.