EasyRAID S16-F2R4 Hardware User Manual - page 10
2
easyRAID S16 Serial ATA Disk Array Systems
1
Over
vie
w
–
Fe
atur
es
Features
The main features of the disk array system are listed as follows. Refer to the specifications table
on page 31 for more detailed information.
• Operating system independent
• Up to eight JBOD, RAID 0, 1, 3, 5, 0+1, 30, or 50 array groups
• On-line expansion
• Allows division of array groups into slices, each mapped to a LUN
• Hot spare disk and automatic on-line rebuild
• Up to 16 hot swap serial ATA disks for a total capacity of 3.5 TB (terabytes)
• Three hot swap power supplies – if one fails, the others take over without interruption
• Two hot swap fans with intelligent speed and temperature management
• Sixteen 150 MB/s serial ATA channels
• Fast 64-bit RISC CPU based RAID controller with up to 1 GB of cache in an SO-DIMM
• Dual Ultra SCSI (ERX16S-U4R4) or fibre channel (ERX16S-F2R4) host interfaces
• Audible alarm, disk tray LED, and LCD panel failure indicators
• Configuration via the front panel and RS-232 interfaces