EasyRAID S8A2-PETT Hardware User Manual - page 11

1

1 System Requirements

Ensure that the following requirements are met before installing the disk array system.

Operating Environment

• 15 cm (6-inches) of space around the disk array system for proper ventilation

• ambient temperature of 5°C to 40°C (40°F to 104°F)

• ambient non-condensing relative humidity of 10% to 85%

• dust, smoke, and oil free environment

• no large magnetic fields, such as those generated by a high voltage power cables 

and motors, etc.

• no direct sunlight

• a flat, stable surface capable of supporting the disk array system

VT100 Terminal Settings

Refer to the following table for a summary of VT100 terminal settings required to com-

municate with the disk array system. Refer to your system manual for instructions on 

setting up the VT100 terminal settings.

Item

Required Setting

Connection

 Serial Port (COM1 or COM2)

Protocol

 RS232 (Asynchronous)

Cabling

 Null Modem cable

Baud Rate

 115200

Data Bits

 8

Stop Bit

 1

Parity

 None