EAT SousVide Supreme Instructions Manual - page 6
Control Panel Display
1. Power on/off button
2. Celsius /Fahrenheit switch button
3. Mode Indicator lights
a. ‘Water’ temperature indicator light
b. ‘Set’ water temperature indicator light
c. Countdown ‘Timer’ light
d. ‘Heating’ element active indicator light
e. Timer active indicator light
4. Set temperature button
5. Set timer button
6. Increase/decrease value toggle (+/-) arrows
7. Start button
Setting the Machine for Use
1. Be sure water bath contains water before starting the machine.
2. Properly insert the electrical cord (power lead) into the power socket on
the back of the machine and plug it into the wall socket.
3. Press and hold the ‘Power on/off’ button for 3 seconds to turn the
machine on. You should feel a slight “click” and hear a tone.
4. The water temperature indicator light should illuminate and the display will
read the current temperature of the water in the bath. (The machine will be
preset to either Celsius or Fahrenheit readings. To change the setting, press
the small Celsius/Fahrenheit switch button.)
5. To set the desired temperature, press the ‘Set Temp’ button. The ‘Set’
temperature indicator light will illuminate. The default temperature of 140ºF/
1
2
3a
3b
3c
3d
3e
4
5
6
6
7
6 SousVide Supreme Instructions
Copyright 2009 EAT Holdings LLC. All rights reserved.