W w w . E a t o n . C o m ex rt 5/7/11 systems quick start.
86-86000-01 b01 - page 3 step 1 power, battery and transformer module unpacking and parts check power module, battery module and optional transformer module are shipped in separate boxes. Off o i/o box footers with extensions rs232 cd rom ex rt user manual battery detection cable power module box co...
86-86000-01 b01 - page 4 step 2 tower configuration e x b r t e x 1 1 r t off on e x b r t tower configuration of standard system battery module (up to 6) power module power module transformer module battery module (up to 6) tower configuration with optional transformer module e x b r t e x 1 1 r t ...
86-86000-01 b01 - page 5 step 3 rack kit power module rail kit (pn 86001) contents front mounting brackets rear support brackets i/o box brackets telescopic rails front mounting brackets rear support brackets telescopic rails battery/transformer/cla module rail kit (pn 86002) contents.
86-86000-01 b01 - page 6 step 3 rack kit (continued) power module front panel display and rack installation e x 1 1 r t off on e x 1 1 r t o f f o n e x 1 1 r t o f f o n e x 1 1 r t off on 1 2 3 finished panel (rack orientation) 1 2 3 a. Prepare the front panel logo and lcd display for rack orienta...
86-86000-01 b01 - page 7 step 3 rack configuration (continued) install i/o box bracket to keep the i/o box stationary while hot swapping the power module. 1. Secure small bracket to larger bracket from the underside. 2. Secure large bracket to rails at the rear of module with four nuts. 1 2 off o 2 ...
86-86000-01 b01 - page 8 step 4 input/output box and brackets installation power module i/o box installation i/o box preparation 1. Knockout appropriate circle for your wire style. 2. Remove the protective plate under the i/o box and connet input/output cables. See section 2.7 in user manual for dif...
86-86000-01 b01 - page 9 step 5 systems connections power module and battery module connections b. System connections with transformer module ac normal input transformer output to load battery module ex rt exb 5/7/11 power module ex rt 5/7/11 transformer module ex rt follow connection diagrams for a...
86-86000-01 b01 - page 10 step 6 initial start-up procedures initial start-up 1. Check that the manual bypass switch is on normal position. 2. Set the normal ac source circuit breaker to the on position. 3. Set the battery circuit breaker to the on position. The load is powered via the bypass ac sou...
86-86000-01 b01 - page 11.
Www.Eaton.Com 86-86000-01 b01.
