Powerware series eaton 9170 + rail kit 9- and 12-slot cabinets installation guide ®.
Eaton and powerware are registered trademarks of eaton corporation or its subsidiaries and affiliates. Phillips is a registered trademark of phillips screw company. Torx is a registered trademark of textron, inc. All other trademarks are property of their respective companies. Ecopyright 2002–2010 e...
Eaton 9170 + rail kit (9- and 12-slot cabinets) installation guide s 164201420 rev d draft 08-mar-2010 1 rackmount installation to install a 9- or 12-slot uninterruptible power system (ups) cabinet into a rack, you must order a cabinet specifically designed for rackmounting. Nine- and 12-slot batter...
Rackmount installation eaton 9170 + rail kit (9- and 12-slot cabinets) installation guide s 164201420 rev d draft 08-mar-2010 2 installing the rail kit c a u t i o n the 9- and 12-slot cabinets are heavy [9-slot: 72 kg (158 lb); 12-slot: 89 kg (196 lb)]. This procedure requires two people to lift an...
Rackmount installation eaton 9170 + rail kit (9- and 12-slot cabinets) installation guide s 164201420 rev d draft 08-mar-2010 3 4. Install six metal clip nuts (nine clip nuts for 12-slot cabinets) onto each side flange along the front of the cabinet (see figure 2). Note do not install metal clip nut...
Rackmount installation eaton 9170 + rail kit (9- and 12-slot cabinets) installation guide s 164201420 rev d draft 08-mar-2010 4 5. Install two rackmount ears (three for 12-slot cabinets) on each side of the cabinet (see figure 3). Insert the two offset tabs on the rear edge of the ear into the match...
Rackmount installation eaton 9170 + rail kit (9- and 12-slot cabinets) installation guide s 164201420 rev d draft 08-mar-2010 5 6. Select the proper holes in the rail that position the cabinet at the desired location in the rack. 7. Secure the loosely assembled rail to the front and rear of the rack...
Rackmount installation eaton 9170 + rail kit (9- and 12-slot cabinets) installation guide s 164201420 rev d draft 08-mar-2010 6 9. With one person lifting each side of the cabinet, position the cabinet onto the two equipment rails (see figure 5). Carefully slide the cabinet into the equipment rack u...
Rackmount installation eaton 9170 + rail kit (9- and 12-slot cabinets) installation guide s 164201420 rev d draft 08-mar-2010 7 service and support if you have any questions or problems with the ups, call your local distributor or the help desk at one of the following telephone numbers and ask for a...
Rackmount installation eaton 9170 + rail kit (9- and 12-slot cabinets) installation guide s 164201420 rev d draft 08-mar-2010 8.
*164201420d* 164201420 d.
