Powerware security detector user’s guide ®.
Powerware is a registered trademark of eaton electrical inc. Ecopyright 2007 eaton corporation, raleigh, nc, usa. All rights reserved. No part of this document may be reproduced in any way without the express written approval of eaton corporation..
Eaton powerware ® security detector user’s guide s 164201679 rev 1 3 security detector important safety instructions save these instructions this manual contains important instructions that you should follow during installation and maintenance of the security detector. Please read all instructions b...
Security detector eaton powerware ® security detector user’s guide s 164201679 rev 1 4 2. Connect the security detector wires to the th-module alarm 1 or alarm 2 connectors, and then tighten the screws on the th-module (see figure 2). Figure 2. Th-module with security detector 3. Remove the backing ...
Security detector eaton powerware ® security detector user’s guide s 164201679 rev 1 5 6. Connect the other end of the rj-45 network cable to the erm (see figure 4). Th-module 1 2 th-module-1 th-module-2 network reset 12 vdc to lan port to power outlet erm figure 4. Erm and th-module 7. Verify that ...
Security detector eaton powerware ® security detector user’s guide s 164201679 rev 1 6 figure 5. Security detector settings 11. When the sensor detects the door or window open, the erm web page displays the alarm. The web page for the alarm table and sensor events also records the alarm. Figure 6. C...
*1642016791* 164201679 1.
