Eaton Powerware Series User Manual - page 4
Other manuals for Powerware Series:
User Manual
Manual is about: BladeUPS 12 kVA
of
8
SECURITY DETECTOR
EATON Powerware
®
Security Detector User’s Guide
S 164201679 Rev 1
4
2.
Connect the security detector wires to the TH-Module alarm 1 or
alarm 2 connectors, and then tighten the screws on the TH-Module
(see Figure 2).
Figure 2. TH-Module with Security Detector
3.
Remove the backing from the security detector sensors and stick
the sensors to the door and doorframe or the window and
windowframe.
4.
If you are installing additional security detectors, repeat Steps 1
through 3.
5.
Connect the RJ-45 network cable to the TH-Module port labeled
“010101“ (see Figure 3).
Figure 3. Connecting the RJ-45 Network Cable