Eaton UPS 20 User Manual - page 51
51
UPS 20-40 kVA, 230/400 V 50/60 Hz output
User’s Guide
1025358
Revision D
3. Select TURN UPS OFF and press and hold
¿
button for 5 seconds. There shall be an
indication sound during the hold.
4. UPS shalll do a shutdown routine.
5. Turn the battery and input circuit breakers to off position to finalise the shutdown
procedure.
Local tie panel solutions
The internal wiring diagrams of tie cabinets can be used as a reference when designing local tie
panels.
Parallel UPS configurations require a tie panel at the system output. It must facilitate service
switches for each UPS module output. The system bypass swicth is optional but helps when
doing the maintenance for the hole parallel UPS system. It’s recommend to source cabinet,
cables, busbars, terminals, fuses, switches and breaker components from the local market.
11. Recycling the used UPS or batteries
Before scrapping UPS or its battery cabinet, the battery bank must be removed. Local
requirements must be followed in battery recycling or discard. The removal of batteries is
allowed only by authorised service personnel due to high energy and voltage.
Do not discard waste electrical or electronic equipment in the trash.
For proper disposal, contact your local collecting/recycling/reuse or hazardous waste center and
follow the local legislation.
These symbols indicate on a product:
Use proper local collecting centers meeting local legislation when handling waste
of electrical and electronic equipment.
WARNING!
HAZARDOUS MATERIALS. Batteries may contain HIGH VOLTAGES, and
CAUSTIC, TOXIC and FLAMMABLE substances. Batteries can injure or kill people
and damage equipment if used improperly. DO NOT DISCARD unwanted batteries
or battery material in the public waste disposal system. Follow ALL applicable, local
regulations for storage, handling and disposal of batteries and battery materials.