Eaton XP-503 User Manual - page 13
9
Managing Accounts and Changing Passwords
Windows Standard Embedded 7 User’s Guide for Eaton XP-503 with Visual Designer
MN031001EN August 2014 www.eaton.com
5. After downloading the CAB file, you should be able to
open it with any zip file utility and extract the entire
CAB file contents to a temporary folder on your PC.
6. Run the Setup.exe file from the temporary folder,
following the prompts to install it in the default location
and to install all components when prompted.
7. After installation is complete, click the Finish button.
You will then be able to connect to the Visual Designer web
server from your PC’s Internet Explorer application.
Using the XP-503 to Serve the Web Client
ActiveX Control
In some applications, a remote user will not be able to be
connected to the Internet and the XP-503 simultaneously.
Rather than force every remote user to manually install the
web client ActiveX control, it may be preferable to store
the ISSymbolVM.cab file on the XP and have the ActiveX
control automatically installed from the XP rather than from
the Eaton website. To set up the XP to automatically serve
the ActiveX control for first time, thin client PCs, copy the
ISSymbolVM.cab file from the XP’s Visual Designer install
folder (C:\Program Files\Eaton\Visual Designer v
X.Y
) and
paste it into the XP unit’s default web folder, and then take
the following steps.
1. Open up the Visual Designer application on your
development PC and go to the Project tab of the
Ribbon and click on the Thin Client icon in the
Web group.
2. In the Project Settings dialog web section, click on the
Advanced… button.
3. In the Advanced dialog, change the ISSymbol URL
property to point to the IP address of the target
XP-503. For example, if the XP’s IP address is set
to 192.168.1.20, set the ISSymbol URL property to:
http://192.168.1.20/. Once the correct URL is entered,
click on OK.
4. Click on the round Visual Designer icon in the upper left
corner of the development window and choose Publish
(or from the
Publish
sub-menu
Save All as HTML
).
5. After all screens have been published, connect to
the XP and download the project as described in the
section “Downloading to the XP-503 via Ethernet”.
Managing Accounts and Changing Passwords
There is an administrator account named
Administrator
set
up on your Eaton XP-503 unit when it was shipped from the
factory. The password for the
Administrator
user account
is
Administrator
.
otee:
N
XP-503 passwords
are
case sensitive.
XP-503 user names
are not
case sensitive.
The XP-503 is set up to automatically log in to the
Administrator
account, which is why the normal
Windows XP Security
dialog box does not appear
upon boot-up.
If you are connecting your Eaton XP-503 unit to a larger
network, you may wish to modify the
Administrator
account name and password to protect the XP-503 unit
from unauthorized access. For more details on managing
accounts, password administration, and auto logon
functionality, consult the XP-503 OS Windows Embedded
information manual.
www.comoso.com