- DL manuals
- EBENCH
- Portable Radio
- KH 2025
- Manual
EBENCH KH 2025 Manual
Summary of KH 2025
Page 1
Kompernaß handelsgesellschaft mbh burgstraße 21 · d-44867 bochum www.Kompernass.Com id-nr.: kh 2025/2026-03/04 kh2025_ib_receiver_uk 01.04.2004 11:39 uhr seite 2.
Page 2
Digitaler weltempfänger bedienungsanleitung kh 2025 uk kh2025_ib_receiver_uk 01.04.2004 11:40 uhr seite 3.
Page 3
Kh 2025 kh2025_ib_receiver_uk 01.04.2004 11:40 uhr seite 4.
Page 4
Kh2025_ib_receiver_uk 01.04.2004 11:40 uhr seite 5.
Page 5
3 digital world receiver e-bench kh 2025 / kh 2026 keep this manual for future reference – and also pass it on with the device to any future owners. Contents 1. Intended use .................................... 3 2. Technical data ................................ 5 3. Safety instructions ..............
Page 6
4 starting the memory scan (7c) saving memory positions (7a) loading memory positions (7b) saving stations (7a) locking the buttons (9) short wave sensitivity (6e) searching for stations (6d) setting times, dates (8a, 8b, 8g) selecting the reception band (6b) changing the type of time display (9) se...
Page 7
5 2. Technical data a) environmental limits temperatures ....: -5 – +40 °c relative humidity: 20 – 80% rmh b) reception ranges usw (fm) ..........: 87.5 – 108.5 mhz mw europe........: 522 – 1656 khz mw usa ............: 520 – 1710 khz sw ....................: 5.85 – 15.6 mhz lw ....................:...
Page 8
6 3. Safety instructions transportable world receivers are used in a wide range of climate zones. Particularly when outdoors, make certain that ... • the environmental limits are not excee- ded (see section 2). • electronic devices can be damaged by moisture. • extremely dry air can cause static cha...
Page 9
7 b) external power supply connect an external power supply of dc 6...7.5v / 300 ma to the power sup- ply jack, as seen in the picture. Note: the station memory described in section 7 will be deleted if the device is without power for longer than about 30 seconds. You should therefore leave an exter...
Page 10
8 c) switching off with time delay if you would like to listen to the radio for a while longer, for instance before falling asleep, but would like the device to switch off automatically after a certain amount of time (10...90 minutes), ... Press the button radio on / sleep only enough times until th...
Page 11
9 6. Receive mode as soon as the device is switched on as described under 5., it is already in receive mode. A) setting the volume press the buttons ▼ volume ▲ to adjust the volume. B) selecting the reception range (band) select the desired reception range with the sliding switch: - usw = ultra shor...
Page 12
10 e) short wave (sw) sensitivity if the the scan process frequently lasts too long, for instance because too many sig- nals are received in the evening, the sensiti- vity can be reduced to short wave (local reception). Set the sensitiviy switch to - rx for local reception - lx for long-range recept...
Page 13
11 a) saving stations when you have found a station that you would like to save: press the button memory. Two small windows then appear in the display: - page containing the numbers 1...5 - mem containing an empty field. Make your selection within the next 10 seconds, otherwise this display disappea...
Page 14
12 b) loading saved stations if you would like to load a saved station: first select the band (reception range). Press the button page until the small window page contains the number for the block 1...5 from which you would like to load the station. Then press one of the buttons m0/5 m1/6 m2/7 m3/8 ...
Page 15
13 8. Clock and timer the device can be used as a radio alarm with two alarm times and one date alarm. An alarm tone is also available in place of the radio alarm function. A) setting the time when the device is switched off, and the date and time appear in the display in alter- nation: press the bu...
Page 16
14 d) setting the home time region set the time region here in which you typically reside: press the button mode until local city appears in the display. Use the tuning buttons to select your home time region: code applies to time region difference to utc utc universal coordinated time ...... 0 lon ...
Page 17
15 e) setting travel destination time regions once you have selected a home time region as described under d): press the button mode until only city appears in the display. Use the tuning buttons to select the travel destination from the same table, as used previously under d). The device now shows ...
Page 18
16 g) setting alarm times 1 / 2 when the device is switched off, and the date and time appear in the display in alter- nation: first select which of the two alarm times should be set. Press the button ... - alarm 1 for alarm time 1 - alarm 2 for alarm time 2 once the respectively selected alarm time...
Page 19
17 in conclusion, select the type of alarm: press the alarm button for the selec- ted alarm time until the display indicates ... - alm: this means that an alarm tone (beep) will sound for approx. 10 minutes. - rad: this means that the radio will be switched on at the alarm time for about 60 minutes....
Page 20
18 i) date alarm (sda) you can program a reminder alarm to go off on a specific date. On this day, an alarm will go off for about 10 minutes on every hour starting at 8:00 a.M. Until you press any button. When the device is switched off and the date and time appear in the display in alter- nation: p...
Page 21
19 when the device is switched off, and the date and time appear in the display in alter- nation: press the button alt. Display until the display shows ... - the symbol : when the device is switched off, only the time will be displayed. - date and : when the device is switched off, the time and date...
Page 22
20 c) additional problems? If the device still does not function as des- cribed above, a defect may be present. In this case, contact the customer service. 11. Disposal if you want to dispose of the device, first remove the batteries. Used batteries may not be disposed of in household waste. Return ...