EBENCH KH 2025 Manual - page 17
15
e) Setting Travel Destination Time
Regions
Once you have selected a home time
region as described under d):
Press the button MODE until only
CITY
appears in the display.
Use the TUNING buttons to select the
travel destination from the same table,
as used previously under d).
The device now shows the time difference
between the travel destination region and
your home time region.
After approx. 15 seconds, the device
returns to the normal time display.
Note: Section 9 describes how you can
have the time difference configured here
displayed in alternation with your home
time region.
f)
Setting Daylight Savings Time
Set this first for the normal clock display:
Press the button MODE until LOCAL CITY
appears in the display along with the
code for your home time region, as set
under d).
Then press the SNOOZE button to
activate daylight savings time and press
it again to deactivate it.
When the symbol for daylight savings
time appears in the display, the time is
shown minus one hour.
Simply repeat this step for the configured
travel destination regions if you want to
apply the daylight savings time to those as
well.
KH2025-2026_IB_UK 01.04.2004 11:29 Uhr Seite 15