Eberle Design Auxiliary Display Unit Operation Manual - page 7
Auxiliary Display Unit (ADU)
Operations Manual
Eberle Design Inc.
Page 4
Section 3
Menu Operation
3.1 MAIN STATUS MENU MAP
The menu driven user interface follows the map shown below. At the top level, the NEXT
button selects whether Current Status details or the main Menu selections are displayed.
The NEXT button is used to scroll through the various selections that each menu level may
provide. Pressing the SELECT button will invoke the function that the cursor (
) points to.
At any time the EXIT or BACK button may be pressed to back out of a menu selection.
3.2 TOP LEVEL MENU
The Top Level Status menu displays the current monitor status, consisting of the fault state,
time and date, and the field signal states. This is the default display following a Reset. The
Diagnostic Wizard (see Section 4) is automatically invoked when the HELP button is
pressed at this level if the CMU-212 monitoris currently in the fault state.
Top Level
Status
Status
Signal
Voltages
(FC
Status)
(RP
Status)
Cabinet
Voltages
Signal
Voltages
Cabinet
Voltages
Menu
View Logs
Previous
Fail Log
Reset Log
AC Line
Log
Clear Logs
All Logs
Previous
Fail Log
Reset Log
AC Line
Log
Config
Change
Log
View
Config
Unit
Options
AMU
Config
12V
Monitor
SB1
Address
Datakey
Format
Datatkey
Checksum ECcom ID
Monitor
ID
User ID
Permissives
Lack of
Signal
(LOS)
LOS Dark
Maps
Multiple
Enable
GY
YR
GR
Clearance
Y
Clearance
Y+R
Clearance
Field
Check
Enable
Yellow
Disable
Current
Sense
Virtual
Channels
ECcom
Port
Flashing
Yellow
Arrow
Firmware
Level