Eberspächer 22 1543 89 00 00 Installation Instructions - page 2
Use with EDiTH-Expert
• It is important to always follow the precise connection order!
• Do not connect the USB adapter to the PC until the EDiTH
software has been installed on the computer.
• TheUSBadapterdoesnotworkunderWindowsNT.
• ForadetaileddescriptionofhowtooperatetheEDiTH-
Expert (A), please refer to the online Help.
1. Start computer and wait until the system has successfully
booted.
2. Start EDiTH software.
3. Plug in the unit connector of the mains cable at the
EDiTH-Expert (A) and connect the 230 V connection (C) to
the mains.
4. Connect the SUB-D connection cable (B) with EDiTH-
Expert (A).
5. Connect USB adapter (E) with the SUB-D connection
cable and plug in the USB connector at the PC.
6. Connect the extension to the EDiTH-Expert (A) and the
control box (see control box-specific assembly instructions
for the EDiTH extension).
7. Switch on EDiTH-Expert (A) at the mains switch (D).
8. Perform the test using EDiTH-Expert (A).
Please note!