Eberspächer D8LC Installation, Operation And Maintenance Instructions - page 31
31
With regard to the following products
air heater type 8 L
we herewith confirm that it conforms with the prime
safety requirements stipulated in the directives of the
EU Council for harmonisation of the legal regulations
of the member states with regard to electromagnetic
compatibility (89 / 336 / EEC).
This declaration applies to all heaters produced
according to the production drawings D 8 L C which
are an integral part of this declaration.
The following standards/directives have been used to
assess the product with regard to electromagnetic
compatibility:
• EN 50081 – 1 Basic form interference emission.
• EN 50082 – 1 Basic form interference resistance.
• 72 / 245 / EEC – Modification status 95 / 54 / EU
interference suppression in motor vehicles.
The high quality of Eberspächer’s products is the key
to our success.
To guarantee this quality, we have organised all work
processes in the company along the lines of quality
management (QM).
Even so, we still pursue a large number of activities
for continuous improvement of product quality in order
to keep pace with the similarly constantly growing re-
quirements made by our customers.
All the steps necessary for quality assurance are sti-
pulated in international standards.
This quality is to be considered in a total sense.
It affects products, procedures and customer/supplier
relationships.
Officially approved public experts assess the system
and the corresponding certification company awards
a certificate.
Eberspächer has already qualified for the following
standards:
Quality management as per
DIN EN ISO 9001:2000 and ISO/TS 16949:1999
Environment management system as per
DIN EN ISO 14001:1996
Disposal
Disposal of materials
Old devices, defect components and packaging mate-
rial can all be separated and sorted into pure-grade
factions so that all parts can be disposed of as requi-
red in an environment-friendly manner or recycled
where applicable.
Electric motors, controllers and sensors (e.g. tempera-
ture sensors) are deemed to be “electronic scrap”.
Dismantling the heater
The heater is dismantled according to the repair stages
in the current troubleshooting / repair instructions.
Packaging
The packaging of the heater can be kept in case
it has to be sent back.
Certification
7
Environment
EU Declaration of Conformity