Eberspächer EasyStart Remote Operating Instructions Manual - page 9
VEHICLE HEATERS – TECHNICAL DOCUMENTATION | 9
SWITCH ON THE HEATER
HEATING OR VENTILATION
Press the
button, the connection is set up
with the stationary unit is.
Data transmission
LED: lights up green
LED: flashes 12x
green
The heater is switched on.
Operating time 30 minutes (factory setting)
PLEASE NOTE!
The following action is possible during opera-
tion:
Query the operating state of the heater
(
see page 10
).
SWITCH OFF HEATER
HEATING OR VENTILATION
Press the
button, the connection is set up
with the stationary unit is.
Data transmission
LED: lights up green
LED: flashes 12x red
The heater is switched off.
PLEASE NOTE!
The following actions are possible after
switching off:
Switch heater back on again.
Change operating time (see
from page 10
).
Switch to HEATING or VENTILATION.
(
from page 12
).
3 OPERATION AND SETTING/ADJUSTMENT