EBN Technology X-PPC 710 Service Manual - page 10
Other manuals for X-PPC 710:
User Manual, Service Manual
of
13
6.2. Mainboard and I/O Panel Disassembly
1. Loosen the four screws.
2. Loosen the four screws by 1.5 mm hexagon socket spanner as shown below,
and then you can remove the mainboard from the device
3. Remove the two screws by #1 Phillips screwdriver as shown below, and then
you can remove the I/O bracket from the back cover..
4. Loosen the four screws by 1.5 mm hexagon socket spanner as shown below,
and then you can remove the VGA and COM 5 from the I/O bracket.
Chapter 9
7