1. DL manuals
  2. Ebode
  3. IP Camera
  4. IPV68P2P
  5. User Manual

Ebode IPV68P2P User Manual

Other manuals for IPV68P2P: User Manual
Manual is about: Wi-Fi HD960P 1.3MP PTZ Dome P2P IP Camera

Summary of IPV68P2P

  • Page 1

    Www.Ebodeelectronics.Eu user manual ipv68p2p wi-fi hd960p 1.3mp ptz dome p2p ip camera before using this product, please read this document carefully and visit www.Ebodeelectronics.Eu for latest manual, software and faq..

  • Page 2

    27-11-2014 2 ebode ipv68p2p contents of the kit: 1x ip camera 1x power adapter 1x resource cd 1x ethernet cable 1x wi-fi antenna 1x quick start guide 1x surveillance sticker 1x ebode leaflet technical specification: wi-fi hd960p 1.3mp ptz dome p2p ip camera p2p feature for easy remote access h.264 v...

  • Page 3

    27-11-2014 3 ebode ipv68p2p user guide table of contents 1. Conformity of use…………………………………………………………………………………… 4 2. Introduction…………………………………………………………………………………………… 4 3. Overview………………………………………………………………………………………………… 5 3.1 key features…………………………………………………………………………… 5 3.2 read before use……………………………………………...

  • Page 4

    27-11-2014 4 ebode ipv68p2p 1. Conformity of use for carefree and safe use of this product, please read this manual and safety information carefully and follow the instructions. The unit is registered as a device that does not cause or suffer from radio-frequency interference. It is ce approved and ...

  • Page 5

    27-11-2014 5 ebode ipv68p2p 3. Overview the ip camera is an integrated wireless ip camera with a colour cmos sensor enabling viewing resolution 1280*960. It combines a high quality digital video camera, with a powerful web server, to bring clear video to your desktop from anywhere on your local netw...

  • Page 6

    27-11-2014 6 ebode ipv68p2p 3.3 physical description front panel figure 3.1 infrared led: 21 ir leds, night visibility up to 20 meters lens: cmos sensor with zoom lens back view figure 3.2 wifi antenna: wireless antenna infrared led lens infrared led antenna.

  • Page 7

    27-11-2014 7 ebode ipv68p2p interface view figure 3.3 1) i/o alarm terminal bloc k this network camera provides a i/o alarm terminal block which is used to connect to external input / output device. The pin(there are four number in the terminal block from no. 1 to no. 4) definitions are descripted b...

  • Page 8

    27-11-2014 8 ebode ipv68p2p 2) audio output interface the jack is used to plug external speakers. 3) power interface connect the external power adapter, request for 12v/2a power. 4) audio input interface the jack is used to plug external microphone. 5) lan 10/100m adaptive ethernet interface. Throug...

  • Page 9

    27-11-2014 9 ebode ipv68p2p 4. Access the ip camera this chapter explains how to access the camera through browser and rtsp player. 4.1 access the camera in lan this camera supports http and https protocols, you can access the camera by 2 ways. (1) http:// lan ip + http port no. Double click the ip ...

  • Page 10

    27-11-2014 10 ebode ipv68p2p open internet explorer if it is not already opened. Click on tools, then click internet options. Next, click the security tab, then click the trusted sites button. Figure 4.4 for firefox, you can add the trusted as the following way: tools ---- options ---- advanced --- ...

  • Page 11

    27-11-2014 11 ebode ipv68p2p click view certificates, and go to servers option. Figure 4.6 go to add exception panel. Figure 4.7 click this button to add it. Enter the camera’s url, here take for example: https://192.168.8.129:443..

  • Page 12

    27-11-2014 12 ebode ipv68p2p 4.2 access the camera in wan 2.2.1 static ip addresses users who have static ip addresses do not need to set ddns service settings for remote access. When you have finished connecting the camera using the lan ip address and port forwarding, you can access the camera dire...

  • Page 13

    27-11-2014 13 ebode ipv68p2p what is the http port no.? Default http port is 88 all cameras have the default http port of 88. For example, if the lan ip link of the camera is http://192.168.8.102:88, this means that the camera’s http port is 88. You can change port 88 to another port if you’d like s...

  • Page 14

    27-11-2014 14 ebode ipv68p2p step 2) enter the username and password of the administrator (default username is admin with a blank password), and click “ok” to apply changes. Step 3) wait around 10 seconds, you’ll see that the camera’s lan ip address has changed. In our example it was changed to 2000...

  • Page 15

    27-11-2014 15 ebode ipv68p2p figure 4.12 first method: use the embedded ddns to access the camera via the internet each camera has an embedded unique ddns domain name, the format of this domain name is xxxxxx.Myipcamera.Org. On the bottom of the camera, you can see the domain name sticker with this ...

  • Page 16

    27-11-2014 16 ebode ipv68p2p second method: use the third party ddns to access the camera via the internet step 1) please go to the third party ddns website(such as www.No-ip.Com) to create a free hostname. Step 2) do ddns service settings within the camera. Please set ddns settings within the camer...

  • Page 17

    27-11-2014 17 ebode ipv68p2p figure 4.14 figure 4.15 sometimes you may need to enter the user name and password again. Click ok and you can see the real-time preview..

  • Page 18

    27-11-2014 18 ebode ipv68p2p figure 4.16 figure 4.17 if you cannot play the video in the vlc player, please check the port mapping. You can read quick installation guide about how to configure port forwarding. Note: if you modify the camera’s username or password, you had better reboot the camera, o...

  • Page 19

    27-11-2014 19 ebode ipv68p2p 5. Surveillance software gui please refer to the quick installation guide if you install the camera at first time. After finishing quick installation, you can take time to learn the operation of the software. 5.1 login window figure 5.1 please check the login window abov...

  • Page 20

    27-11-2014 20 ebode ipv68p2p figure 5.2 enter the new username, new password and confirm the password. Click modify button, you will see the login page again. 5.3 setup wizard after logging in for the first time, you will be directed to the “setup wizard” automatically. Here you can set the basic pa...

  • Page 21

    27-11-2014 21 ebode ipv68p2p system time: select the time zone you need to set the date, time,format, etc. Figure 5.5 wireless networks: click scan, find the ssid of your wireless router, select and enter the password. Figure 5.6 ip: set the ip address of the camera. You could choose to obtain an ip...

  • Page 22

    27-11-2014 22 ebode ipv68p2p figure 5.7 note: it takes about 1 minute to connect the camera to your router. 5.4 surveillance window figure 5.8 section1 live video / settings buttons path to surveillance window. Click button and back to surveillance window. Path to administrator control panel, click ...

  • Page 23

    27-11-2014 23 ebode ipv68p2p section2 multi-device window the firmware inside the camera supports up to maximum of 9 cameras being monitoring at the same time. You can add other cameras in multi-device setting. Figure 5.9 section3 mode/ stream / mirror/ flip / zoom in / zoom out buttons mode 1) 50hz...

  • Page 24

    27-11-2014 24 ebode ipv68p2p you can reset the stream type on settings-> video-> video settings panel. Figure 5.10 after changing, please re-login the camera and you can see the modification. “zoom in”or“zoom out” device support 3x zoom feature, click or , the focal length of the camera lens will be...

  • Page 25

    27-11-2014 25 ebode ipv68p2p section5 cruise / preset settings cruise settings the default cruise tracks have two types: vertical and horizontal. Vertical: the camera will rotate from up to down. Horizontal: the camera will rotate from left to right. Start cruise. Stop cruise. If you want to define ...

  • Page 26

    27-11-2014 26 ebode ipv68p2p how to do preset position? Firstly, move the camera and stop at a desired place where you want make preset position. Secondly, click button and enter a descriptive name for the preset position. The preset position cannot contain special characters. Then click ok to save ...

  • Page 27

    27-11-2014 27 ebode ipv68p2p section9 play/stop/ talk/audio/ snap/ record/ full screen button 1 play click it to play the video of the camera 2 stop click it to stop the video of the camera 3 talk click the button and the icon will become to , then talk to the microphone that connected with pc, peop...

  • Page 28

    27-11-2014 28 ebode ipv68p2p first method: here is a convenient and fast solution to zoom up/down screen by clicking video screen and adjusting mouse pulley, or by press the ctrl key and click the mouse left button. Second method: click it and the live view will be digital zoomed up, then click zoom...

  • Page 29

    27-11-2014 29 ebode ipv68p2p 6. Advanced camera settings click the button “settings”, goes to administrator control panel to make advanced camera settings. 6.1 status status contains four columns: device information, device status, session status and log, it will show you various information about y...

  • Page 30

    27-11-2014 30 ebode ipv68p2p 6.1.3 session status session status will display who and which ip is visiting the camera now. Figure 6.3 6.1.4 log the log record shows who and which ip address accessed or logout the camera and when. Figure 6.4 reboot the camera and clear the log records. 6.2 basic sett...

  • Page 31

    27-11-2014 31 ebode ipv68p2p 6.2.2 camera time this section allows to configure the settings of the internal system clocks for the camera. Figure 6.6 time zone: select the time zone for your region from the drop-down menu. Sync with ntp server: network time protocol will synchronize your camera with...

  • Page 32

    27-11-2014 32 ebode ipv68p2p how to change the password of administrator? Firstly, select the account of administrator, then select “change password”, enter the old password and the new password, lastly click modify to take effect. Figure 6.8 how to add account ? Select one blank column, then enter ...

  • Page 33

    27-11-2014 33 ebode ipv68p2p figure 6.10 delete：select the account you want to delete, then click delete button to take effect. Note: default admin account cannot be deleted. You can add other administrator users. How to change the username? Firstly, select the account which you want to change the u...

  • Page 34

    27-11-2014 34 ebode ipv68p2p add cameras in lan in multi-device settings page, you can see all devices searched in lan. The 1st device is the default one. You can add more cameras in the list in lan for monitoring. The camera’s software supports up to 9 ip cameras online simultaneously. Click the 2n...

  • Page 35

    27-11-2014 35 ebode ipv68p2p back to surveillance windows, and click four windows option, you will see four cameras you added. Figure 6.14 figure 6.15 add cameras in wan if you want to view all cameras via the internet(remote computer), you will need to add them using ddns domain name. Firstly, make...

  • Page 36

    27-11-2014 36 ebode ipv68p2p figure 6.16 click multi-device settings. Choose the 2nd device. Fill in the 2nd camera’s name, ddns domain name, port number. Enter user name and password and then choose add. Figure 6.17 1 ---- the camera model: mj or h264. 2 ---- the 2nd camera’s name 3 ---- fill in th...

  • Page 37

    27-11-2014 37 ebode ipv68p2p figure 6.18 return to video window. You will see all of the cameras accessible through the internet. When you are away from home, you can use the first camera’s ddns domain name and port to view all the cameras via internet. Figure 6.19.

  • Page 38

    27-11-2014 38 ebode ipv68p2p 6.3 network this section will allow you to configure your camera’s ip, pppoe, ddns, wireless settings, upnp and port. 6.3.1 ip configuration if you want to set a static ip for the camera, please go to ip configuration page. Keep the camera in the same subnet of your rout...

  • Page 39

    27-11-2014 39 ebode ipv68p2p figure 6.22 if you don’t know the dns server, you can use the same settings as the default gateway. 6.3.2 wireless settings step 1: choose “settings” on the top of the camera interface, and go to the “network” panel on the left side of the screen, then click “wireless se...

  • Page 40

    27-11-2014 40 ebode ipv68p2p step 2: click the ssid (name of your router) in the list, the corresponding information related to your network, such as the name and the encryption, will be filled into the relevant fields automatically. You will only need to fill in the password of your network. Make s...

  • Page 41

    27-11-2014 41 ebode ipv68p2p figure 6.25 6.3.4 ddns the camera has embedded a unique ddns domain name when producing, and you can directly use the domain name, you can also use the third party domain name. Ipcam domain name here take test09.Myipcamera.Org for example. Go to option of ddns on the set...

  • Page 42

    27-11-2014 42 ebode ipv68p2p figure 6.27 figure 6.28 please register an account step by step according to instructions on www.No-ip.Com after registration, please login your email which used to register. You will receive an email from website, please click the link to activate your account as indica...

  • Page 43

    27-11-2014 43 ebode ipv68p2p secondly: login the link with the registered username and password to create your domain name. Figure 6.29 figure 6.30 please create the domain name step by step according to instructions on www.No-ip.Com step 2, do ddns service settings within the camera please set ddns...

  • Page 44

    27-11-2014 44 ebode ipv68p2p firstly, goes to option of ddns settings on the administrator panel. Secondly, select no-ip as a server.. Thirdly, fill test as ddns user, fill password test2012 as ddns password, fill ycxgwp.No- ip.Info as ddns domain and server url, then click save to make effect. The ...

  • Page 45

    27-11-2014 45 ebode ipv68p2p 6.3.5 upnp figure 6.32 the default upnp status is closed. You can enable upnp, then the camera’s software will be configured for port forwarding. Back to the “device status” panel, you can see the upnp status: figure 6.33 the camera’s software will be configured for port...

  • Page 46

    27-11-2014 46 ebode ipv68p2p another way to change the http port no. Step 1: open the ip camera tool, select the camera you would like to change the port of, right click on the ip address, and click on ”network configuration”, this brings up the network configuration box as shown in figure 6.35 and ...

  • Page 47

    27-11-2014 47 ebode ipv68p2p figure 6.37 note: if the camera cannot be accessed, make sure the port forwarding is succeed. Https port: the default port is 443. You can use the url to access the camera: https:// ip + https port no. Onvif port: by default, the onvif port is set to 888. Also, they can ...

  • Page 48

    27-11-2014 48 ebode ipv68p2p 5-----save click save to take effect 6-----test click test to see if mail has been successfully configured. Click test to see if mail has been successfully configured. Figure 6.39 if the test success, you can see the success behind the test, at the same time the receiver...

  • Page 49

    27-11-2014 49 ebode ipv68p2p figure 6.40 figure 6.41 ftp server: if the ftp server is located on the lan, you can set as figure 6.43. If you have an ftp server which you can access on the internet, you can set as figure 6.44 port: default is port 21. If changed, external ftp client program must chan...

  • Page 50

    27-11-2014 50 ebode ipv68p2p figure 6.1 search and install ipcam viewer for android device, or search and install ipcam_viewer on app store for ios device. If you want to know more details of the ios app or android app, see the ios app user manual or android app user manual. 6.4 video this section a...

  • Page 51

    27-11-2014 51 ebode ipv68p2p stream type: there are four types to identify different streams you have set. Resolution: the camera supports multiple types, for example: 960p, 720p, vga, qvga. The higher the resolution is, the clearer video will become. But the code flux will become larger too, and it...

  • Page 52

    27-11-2014 52 ebode ipv68p2p figure 6.45 click back button and return to the osd page, click save to take effect. Back to the surveillance window, you can see the mask area as the following picture: figure 6.46 the mask area.

  • Page 53

    27-11-2014 53 ebode ipv68p2p 6.4.4 snapshot settings on this page you can set the snapshot pictures’ image quality and the storage path. Figure 6.47 manual snap quality: low, middle, high. The higher the quality, the clearer the picture. Alarm pictures save path: ftp. If you have done ftp and alarm ...

  • Page 54

    27-11-2014 54 ebode ipv68p2p 6.5 alarm 6.5.1 motion detection ip camera supports motion detection alarm, when the motion has been detected, it will send emails or upload images to ftp. Figure 6.49 to enable motion detection, follow the steps below: step 01: enable motion detection step 02: sensitivi...

  • Page 55

    27-11-2014 55 ebode ipv68p2p there are four alarm indicators: a camera sound and pc sound if the camera has connected with a speaker or other audio output device, if you select camera sound or pc sound, when the motion has been detected, the people around the camera will hear beep alarm sound. B sen...

  • Page 56

    27-11-2014 56 ebode ipv68p2p figure 6.52 ② specify an alarm schedule click the week day words, the corresponding column will be selected. For example, click tue, the all column of tue turns to red, that means during tuesday whole day, when something moving in the detection area, the camera will alar...

  • Page 57

    27-11-2014 57 ebode ipv68p2p 6.5.2 io alarm this ip camera provides a i/o alarm terminal block which is used to connect to external input / output device. The alarm device(door sensor, infrared sensor, smoke detectors, etc) send input command to the network camera, then the network camera send outpu...

  • Page 58

    27-11-2014 58 ebode ipv68p2p figure 6.57 if an io alarm is triggered and io alarm output device will always alarm (sound alarm is issued a warning sound, alarm lights in flash etc.). Click "clear io alarm output" , the alarm output device will stop alarming. If io alarm is triggered again after alar...

  • Page 59

    27-11-2014 59 ebode ipv68p2p figure 6.59 6.6 record 6.6.1 storage location on this page you can change the manually recording storage path, the default storage path is d:\ipc. Figure 6.60 6.6.2 alarm recording this page you can change the pre-record time and alarm record time. Figure 6.61.

  • Page 60

    27-11-2014 60 ebode ipv68p2p the default pre-recorded time is 5s and the alarm record time is 30s, you can change another time, click save button to take effect. 4.6.3 local alarm location on this page you can enable local alarm record, and select the local alarm record time. Figure 6.61 4.6.4 recor...

  • Page 61

    27-11-2014 61 ebode ipv68p2p figure 6.63 6.7.2 cruise settings this section explains how to add/ delete one cruise track. Figure 6.64 setting the cruise mode there are two cruise mode: cruise time and cruise loops. Cruise time: select cruise time from cruise mode dropdown, then set the cruise time o...

  • Page 62

    27-11-2014 62 ebode ipv68p2p manage the cruise track there are two default cruise tracks: vertical and horizontal. Vertical: the camera will rotate from up to down horizontal: the camera will rotate form left to right. Add: add one cruise track, then click save button. Delete: select one cruise trac...

  • Page 63

    27-11-2014 63 ebode ipv68p2p figure 6.67 figure 6.68 after add the cruise track, back to the surveillance window, click cruise, here you can see all cruise tracks you have added. Figure 6.69 add the preset. The cruise tracks have added to the “track 1” ..

  • Page 64

    27-11-2014 64 ebode ipv68p2p there are other buttons between the preset points and cruise track, you can use these buttons to adjust the order of preset points or add/delete one preset points in one cruise track. Figure 6.70 add: select one preset points and add it to the selected cruise track. Dele...

  • Page 65

    27-11-2014 65 ebode ipv68p2p 6.8 firewall this section explains how to control the access permission by checking the client pc’s ip addresses. It is composed of the following columns: block access from these ip addresses and only allow access from these ip addresses.. Figure 6.72 enable firewall, if...

  • Page 66

    27-11-2014 66 ebode ipv68p2p click browse, choose the correct bin file and then click system upgrade. Make sure you have unplugged the sd card. Don’t shut down the power during upgrade. After upgrading, you can see the upgrade result. Figure 6.74 upgrade firmware by ip camera tool double click the i...

  • Page 67

    27-11-2014 67 ebode ipv68p2p note: 1) before upgrade the firmware, please unplug the sd card and reboot the camera, don’t upgrade the firmware in wan through the web ui, or else the upgrade process may be failed. 2) please ensure you have download the correct firmware package for your camera before ...

  • Page 68

    27-11-2014 68 ebode ipv68p2p 6.9.5 reboot click reboot system to reboot the camera. This is similar to unplugging the power to the camera. Figure 6.79 7. Appendix 7.1 frequently asked questions note: any questions you would meet, please check network connections firstly. Check the working status rev...

  • Page 69

    27-11-2014 69 ebode ipv68p2p figure 7.2 reboot the firefox after the plugin installation is successfully completely, then relogin the camera again, you can see the surveillance window. Note: if you could not view living video after running the activex, only a red cross in the centre of the video or ...

  • Page 70

    27-11-2014 70 ebode ipv68p2p download the plugin and drag it to the extensions page of google chrome. Figure 7.4 click add button to install the plugins. Figure 7.5 reboot the browser and relogin the camera, you will see the surveillance window. Go to extensions page. Click add button to install the...

  • Page 71

    27-11-2014 71 ebode ipv68p2p 7.1.3 i have forgotten the administrator password to reset the administrator username and password, press and hold down the reset button for 5 seconds. Upon releasing the reset button, wait for 20 seconds, the camera will reboot and the username and password will return ...

  • Page 72

    27-11-2014 72 ebode ipv68p2p if you allow the activex running, but still could not see living video. Please change another port number to try. Don’t use port 8000. Figure 7.7 note: make sure that your firewall or anti-virus software does not block the camera or activex. If you could not see video, p...

  • Page 73

    27-11-2014 73 ebode ipv68p2p 7.3 specifications items ipv68p2p image sensor sensor high definition color cmos sensor display resolution 1280 x 960 (1.3 megapixel) min. Illumination 0 lux (with ir illuminator) lens lens type glass lens focal length f:3.7~14.8mm aperture f1.6 angle of view 70° maximum...

  • Page 74

    27-11-2014 74 ebode ipv68p2p 5.4 ce & fcc electromagnetic compatibility (emc) fcc statement this device compiles with fcc rules part 15. Operation is subject to the following two conditions. This device may not cause harmful interference, and this device must accept any interference received, includ...

  • Page 75

    27-11-2014 75 ebode ipv68p2p declaration of conformity hereby, ebode electronics, declares that this ebode ipv68p2p is in compliance with the essential requirements and other relevant provisions of the following directives: directive 2004/108/ec of the european parliament and of the council of 15 de...

  • Page 76

    27-11-2014 76 ebode ipv68p2p declaration of conformity to r&tte directive 1999/5/ec for the european community, switzerland, norway, iceland and liechtenstein product category: general consumer (category 3). English: this equipment is in compliance with the essential requirements and other relevant ...

  • Page 77

    27-11-2014 77 ebode ipv68p2p also available from ebode: bluetooth speaker and bluetooth receiver .. Eb o de is focusing on wireless audio and video products, that are affordable, innovative and plug & play. The products provide you with comfort in your home, help you to avoid wires, and make sure yo...

  • Page 78

    27-11-2014 78 ebode ipv68p2p also available from ebode: fm transmitters and infrared products eb o de is focusing on wireless audio and video products, that are affordable, innovative and plug & play. The products provide you with comfort in your home, help you to avoid wires, and make sure you can ...

  • Page 79: Notes

    27-11-2014 79 ebode ipv68p2p notes.

  • Page 80: Www.Ebodeelectronics.Eu

    27-11-2014 80 ebode ipv68p2p www.Ebodeelectronics.Eu.