EC Monitor EC-TS-1515 User Manual - 2.2 Vesa Mounting:
EC TS-1515 Touch Monitor User Manual ® Copyright 2010 P. 4
2.1 Steps to install the monitor
1. Plug the Power Adaptor for the monitor into a nearby outlet.
Connect the Adaptor to the power port (b) on the back of the
monitor.
2. Set the display resolution to 1024 x 768 60Hz in your PC.
Connect the VGA signal cable from the D-sub (Analog)
connector on the video card of your PC to the 15-pin, D-sub
connector (a) on the back of your monitor. If your monitor
displays an image, installation is complete.
3. If your monitor have touch screen or MCR function, connect the
touch screen cable from port (D) to the USB of the PC and MCR
cable from port (C) to the PS/2 keyboard plug of the PC.
2.2 VESA mounting:
1. Turn off the monitor and unplug the Power Adaptor.
2. Remove the stand by taking out the cap and the three screws in
the rear.
3. Align the VESA mount with the holes in the VESA compliant
mounting pad and secure it with the four screws supplied with
the arm-type base, wall mount hanger or other base.