Echo Audio Echo 2 User Manual - Specifications
Echo 2 User Guide
19
Specifications
Analog Inputs
•
Two ¼" TS/TRS inputs with selectable microphone, balanced line, or high-
impedance instrument.
•
Switchable +48 V phantom power
•
EZ Trim - Precisely set your inputs to the optimal level with the touch of a button
•
Low noise (-129 dBu EIN) studio grade mic preamps, up to 75 dB of gain
•
Input impedance - Mic: 1.8K ohms, Line: 20K ohms, Instrument: 1 Meg
•
Two female XLR to male 1/4" TRS cables included
•
Frequency Response: 10 Hz – 20 kHz, +/- 0.1 dB
•
Dynamic Range: 115 dB A-weighted
•
THD+N: .001% A-weighted
Analog Output
•
Two ¼" TS/TRS outputs
•
Frequency Response: 10 Hz – 20 kHz, +/- 0.1 dB
•
Dynamic Range: 113 dB A-weighted
•
THD+N: .0015% A-weighted
•
Line output impedance: 120 Ohm
•
One
⅛
" headphone output with adjustable volume and monitor levels and main
mute
•
Max output level headphones: 10 dBu
•
Max output current headphones: 60 mA
•
Headphone output impedance: 1 Ohm
•
Supports full duplex 2 channels in, 4 channels out operation at 24 bit,
up to 192 kHz sample rate
•
Near zero latency hardware monitoring
Converters
•
128x oversampling converters
•
Low jitter with less than 4 ps internal clock
•
24 bit data resolution maintained throughout signal path
•
Multiple standard sampling rates supported: 44.1k, 48k, 88.2k, 96k, 192k
Dimensions
•
5.4” x 3.6” x 1” (137mm x 92mm x 26mm) – 0.5 lbs.