Echo Radiolink User Manual - page 7
Manual is about: Wireless TV System
of
16
4.Rotate the volume wheel ON/OFF switch until the ON/OFF LED is
OFF on the receiver and place the receiver on the charging base.
When fully charged the charge LED will turn to green.
5.If your TV has phono audio output sockets connect the 2 x phono
plugs of the phono to 3.5mm lead to these sockets and plug the
3.5mm jack plug end of the lead into the RadioLink
TM
Transmitter
Audio input socket (see Fig 3).
6.If your TV has no audio output sockets but has a spare SCART
socket, plug the scart adapter into the TV and connect the two
phono connectors of the phono to 3.5mm plug lead. Then
connect the 3.5mm jack plug end into the Audio Input socket of
the transmitter (see Fig 4).
Fig 3
Fig 4
5