EchoStar T-333 MHP User Manual - page 4

Remote Control 

Button 

Action 

Switches your decoder between standby and operating modes. 

Displays the Applicationswindow. Pressing this button a second time 

closes the Application window. 

Displays one of the channel lists. Pressing this button a second time hides 

both the Channel List and the Channel Banner.  

Select the channel you want to tune to then press 

. 

Switches circularly between: viewing mode, Channel Banner, Channel 

Banner with Extended Information. 

In the Channel Banner, switch between the current program information 

and the next program information. In the menu, select menu items or 

change parameters with predefined values. 

In Channel Banner, scroll channel information up/down. The decoder 

remains tuned to the current channel. In the menu, select menu items or 

menu options. 

In viewing mode, runs interactive applications (if available).  

In the Channel Banner, tunes to the channel the Channel Banner refers 

to. In the menu, selects the currently highlighted menu item or confirms 

your choices made in the menu screens. 

Increases/decreases audio volume. 

Displays/leaves the menu system.  

In viewing mode, or in the Channel Banner, tune to the next/previous 

channel. In the Channel List, menu, or in the Guide, scroll the channel list 

page up/down.  

Mutes the sound. Pressing this button once again will restore the 

previously set volume level. 

Displays the Options menu.  

In viewing mode or in the Channel Banner, alternates between the current 

and previous program within the same channel list. In the menu or in the 

Program Guide, returns to the previous screen. 

In the Channel Banner, removes the Channel Banner, or Extended 

Information from the screen. In the menu system or Program Guide, 

returns to normal viewing. 

Color buttons are used to navigate through external MHP applications 

such as program guide, t-commerce, voting, etc. 

Number buttons allow you to type your choice directly, for example 

channel numbers or a PIN. 

Switches the source signal.

Displays the Program Guide for the currently tuned channel. 

This button is used to navigate through external MHP applications such as 

program guide, t-commerce, voting, etc 

These keys perform no action in the current version of the application. 

DT 530 DIGITAL SET-TOP-BOX 

 4