- DL manuals
- Eckman
- Chainsaw
- EKECS21
- Instruction manual
Eckman EKECS21 Instruction manual
Summary of EKECS21
Page 1
Multi-function electric chainsaw model ekecs21 instruction manual please read and save these instructions for further reference! Any questions or problems?-call the eckman helpline on: 0844 441 3011 or go to www.Eckman.Co.Uk ..
Page 2: Contents
- 1 - contents symbol explanation..................................................................................................................2 general power tool safety warnings ..................................................................................3-4 chainsaw safety warnings:........
Page 3
- 2 - please read this instruction manual carefully before using the machine. Symbol explanation : read the instruction manual completely and carefully before using the power tool. This marking indicates that this product should not be disposed of with other household wastes. Follow the disposal ins...
Page 4
- 3 - general power tool safety warnings warning read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings ref...
Page 5
- 4 - 4) power tool use and care a) do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. B) do not use the power tool if the switch does not turn it on and off. Any power tool that...
Page 6
- 5 - in many cases, a contact with the bar point may lead to a situation when the operator unexpectedly bends backward and as a result, the bar is ejected upward toward the operator . Backlash is a result of inappropriate or wrong use can be prevented by appropriate preventive measures described be...
Page 7
- 6 - specified conditions of use use only for purposes outlined in this instruction manual and in the manner described. Any modification by the user will invalidate this warranty. Not recommended for use by persons under the age of 18 years unless under supervision. Parts description 1 2 3 4 5 9 11...
Page 8
- 7 - fig.1 1. Handle locking button 2. Shoulder strap 3. Telescopic pole with non-slip safety grip 4. Locking knob 5. Angle adjustment pivot button 6. Mechanical brake 7. Chainsaw front handle 8. Chain tension knob 9. Bar cover 10. Bar tension knob 11. Oil cap 12. Chainsaw head locking button 13.Tr...
Page 9
- 8 - vi . Assembly 1) unpacking this product requires assembly. Carefully remove the product from the box. Inspect the product carefully to make sure no breakage or damage occurred during shipping. Do not discard the packing material until you have carefully inspected and satisfactorily operated th...
Page 10
- 9 - 1.Place the chain links around the drive sprocket and let the fastening bolt which is connecting on the bar cover passes through the gap of the bar. 2.Check if all parts are seated properly and hold chain and chain bar in a level position. Fit cover and adjust the chain tension knob properly, ...
Page 11
- 10 - setting the chainsaw tension tensioning chain for model with sds tool-less tensioning system loosen the lock knob by turning it anti-clockwise approximately 1-2 turns. Check whether all chain links lie correctly in the guide tracks of the bar. Press the tension ring inwards and turn it in a c...
Page 12
- 11 - fit telescopic pole to the chain saw machine motor and secure it with the self-locking system on the machine. - use as a super-extended lopping chainsaw release the locking knob from the pole, extend the telescopic pole to desired length and firmly re-tighten the knob. Locking knob.
Page 13
- 12 - checking the chain oil (note: never use without chain oil !) the chainsaw is shipped without oil in it. The chain saw must never be used without oil or with an oil level that is below the indicator. Sae #0w-30 is ideally recommended for general use. Warning. Always ensure that the chainsaw is...
Page 14
- 13 - paper laying on the ground. If a patch of oil appears and becomes larger, then the automatic oil function is working. If there are no traces of oil even though the oil tank is full, then the automatic oil function is not working. If the automatic oil function is not working, remove the chain ...
Page 15
- 14 - 2) instruction for cutting (when being used as a pole lopping chainsaw) a) use both hands to grip pole saw. Use designated grip areas and strap when operating pole saw (see photo as below). Grip firmly. Thumbs and fingers must wrap around pole saw handle and pole. B) make sure your footing is...
Page 16
- 15 - warning: when cutting free-hanging branches,the saw chain(2)and/or guide bar(1)may be pinched,or the branch may fall.Either may cause the operator to lose control over the chainsaw.If the saw chain and /or guide bar becomes pinched,stop the engine immediately,and remove the saw by lifting the...
Page 17
- 16 - 6) adjusting pivoting head disconnect the plug from the power supply. Place the chain saw on a flat surface. Depress the pivot button and adjust cutting head(0°-30°) until it snaps securely into place at one of the three positions indicated.（see photo as below） caution: do not place hand betw...
Page 18
- 17 - releasing the chain brake: to be able to use your chain saw again, you must release the saw chain again. First, switch off the chainsaw. Then push the front finger guard back into the vertical position until it locks in place . The chain brake is now fully functional again . Chain sharpening ...
Page 19
- 18 - before making any adjustments or maintenance procedures. 1. Always keep the air holes clean on the electric chainsaw body. They tend to become clogged with sawdust during use and this affects the efficiency of cooling, causing overheating of the motor. Electric motors that become damaged due ...
Page 20
- 19 - ec declaration of conformity the undersigned, as authorised by:ningbo east tools co.,ltd. Declares that the following equipment manufactured by ningbo east tools co.,ltd. Has been tested and conforms to the directive: - en 62841-1:2015;en 60745-2-13:2009; en iso 11680-1:2011;en 60335-1:2002/a...
Page 21: Exploded View
- 20 - exploded view.
Page 22: Part List
- 21 - part list no. Description qty no. Description qty 1 power cord & plug 1 40 locking knob 1 2 power cord jacket 1 41 connecting part 1 3 screw 37 42 connecting part 1 4 power cord fixer 1 43 screw 1 5 right handle 1 44 front handle 1 6 trigger 1 45 left chassis 1 7 spring 1 46 bearing 3 8 capac...
Page 23
- 22 - 79 positioning plate 1 80 sprocket 6 81 screw 1 82 screw 1 83 saw chain 1 84 guide bar 1 85 scabbard 1 86 adjusting plate 1 87 sprocket cover 1 88 adjusting washer 1 89 adjusting wheel 1 90 spring 1 91 tension wheel 1.