User manual manual de instrucciones notice d’emploi bedienungsanleitung.
3 list of contents 1. Important note 04 1.1. Precautions 04 2. Introduction 04 3. Installation 05 3.1. Location, assembly, ventilation 05 3.2. Mains connection 06 3.3. Signal input connections 06 3.4. Subsonic filter 06 3.5. Limiter circuit 06 3.6. Output connections 07 4. Operation and usage 07 4.1...
4 1. Important note congratulations! You are the owner of a carefully designed and manufactured equipment. We thank you for trusting on us and choosing our amplifier dpa spm (all purpose) (switching power mosfet). In order to obtain maximum operativity and perfect functioning order, it is most impor...
5 ecler dpa2000 makes use of n-channel mosfets. This technology, which has been successfully implemented in the industrial product line "enviro", allows for very high output power without the use of bridge configurations. The dpa2000 keeps its “all the power all the time” philosophy, even when drivi...
6 3.2. Mains connection the dpa amplifiers are fed with alternate currents, depending on the country, of 110-120, 220-240v 47-63hz. (see characteristics in the back of the unit) consuming: model dpa600 dpa1000 dpa1400 dpa2000 consumption 830va 1250va 1720va 3115va the mains cables must not be near t...
7 3.6. Output connections the output section on the rear panel features speakon connectors (12). Whenever you need to operate the amplifier in bridged mode (mono or bridged), you must set the “stereo bridged" switch (11) to bridged. The input signal is taken from the channel 1 connector and the sign...
8 clip/prot indicators functioning as clip indicator. These illuminate when the signal given to the loudspeakers is 1.5db before the real clip. This clip system takes into account the possible variations in the mains voltage always giving a real indication even if the electric mains varies. It is no...
9 6. Function list 1. Input attenuator 2. Combined clip and protection indicator, clip/prot 3. Thermal protection indicator, th 4. Signal present indicator, sp 5. Illuminated mains switch 6. Mains socket 7. Switch to disconnect chassis earth/electrical ground, gnd link 8. Earth terminal, gnd 9. Jack...
31 8. Technical characteristics 8. CaracterÍsticas tÉcnicas 8. Caracteristiques techniques 8. Technische daten dpa600 dpa1000 dpa1400 dpa2000 power 20-20khz 1% thd 2 stereo 410 wrms 682 wrms 990 wrms 1420 wrms 4 stereo 275 wrms 440 wrms 635 wrms 940 wrms 8 stereo 180 wrms 275 wrms 395 wrms 550...
32 9. Diagrams 9. Diagramas 9. SchÉmas 9. Diagramme 9.1. Figures 9.1. Figuras 9.1. Schémas 9.1. Abbildungen.
33.
34 9.2. Block diagram 9.2. Diagrama de bloques 9.2. Diagramme de blocs 9.2. Blockschatbild.
35.
Ecler laboratorio de electro-acústica s.A. Motors 166-168, 08038 barcelona, spain internet http://www.Ecler.Com e-mail: info@ecler.Es 50.0093.01.04.
