Ecler TRAIL103 User manual - Location
6
LOCATION
AND
FITTING
The TRAIL1O3 offer different fitting systems. Included in the packing you will find all
the accessories needed for the different options: installation on a lighting rail, on a
surface (wall or ceiling) and in a threaded bar or truss.
The following rules should be followed:
•
At all times, install the unit on solid, firm surfaces if choosing to install on a
surface (ceiling/wall).
•
Installation on a lighting rail: TRAIL103 is compatible with 4 thread/3
circuit lighting rail systems.
•
For good sound reproduction, there should be no obstacle between the
loudspeakers and those listening.
•
Adjust the sound pressure levels to the playback needs. Despite its small
size, TRAIL103 has a performance far higher than domestic loudspeakers.
How to
install on a lighting track
:
1.
Remove the side covers covering the loudspeaker arm.
2.
Thread the audio cables through the holes so that the cable is then hidden
under the side covers.
3.
Break the lug on the side cover to take out the cable. Use pliers to do this.