Eclipse 902-545 Instruction Manual - page 4
GENERAL SAFETY RULE
TO WORK IN SAFE CONDITIONS WITH THIS TOOLING, IT IS IMPERATIVE TO
READ CAREFULLY THE DIRECTIONS FOR USE AND TO FOLLOW THE
INSTRUCTIONS IT CONTAINS. IF YOU DO NOT RESPECT THE INFORMATION
WRITTEN IN THAT INSTRUCTION MANUAL THE WARRANTY WILL BE
CANCELLED.
1.
Work area safety
a. Keep work area clean and well-lit. Cluttered or dark areas invite accidents.
b. Keep children and bystander away while operating the hydraulic punch driver.
Distractions cause you losing control.
c. Please do not use or store this tool under high temperature, or one surrounding
filling with corrosive fluid. Pay attention to the sealing kits becoming aging.
2.
Personal safety
a. Stay alert, watch what you are doing and use common sense when operating the
tool. Do not use the tool while you are tired or still under the influence of drugs,
alcohol or medication. A moment of inattention may result in series personal
injury.
b. Use safety equipment. Always use safety equipment such as eye protector,
safety cap, etc
to reduce
the risk of personal injury.
c.
Please use the tool properly, the tool with correct power will do the job better
and safer at the rate for which it was designed.
d.
Do not put your fingers in the head of the hydraulic punching tool during
operating. Your fingers could be pinched very severely.
NO.
DESCRIPTION
QTY
NO.
DESCRIPTION
QTY
1
cover
1
23
spring 0.3×5.7×28
n=10.5
1
2
outer steel pipe
1
24
valve
1
3
hexagon socket set
screws M 4×5
1
25
hexagon socket set
screw M 4×6
1
4
plug group
1
26
stand
1
5
oil sac
1
27
cross-head screw
1
6
o-ring 21.8×3.1
1
28
steel ball C5
1
7
oil cup group
1
29
turn screw
1
8
plastic retainer ring
13×10×1.5
1
30
o-ring 4.2×1.9
1
9
o-ring 9×2
1
31
screw
1
10
plunger
1
32
turn screw
1
11
rubber grip
1
33
elastic cylindrical
pin 3×16
1
12
active handle
1
34
coupler
1
13
pin 8
1
35
cylinder
1
14
pin 7
1
36
plastic retainer ring
34×28×1.5
1
15
elastic retainer ring 7
2
37
o-ring 27×3.5
1
16
oil hose(800mm)
1
38
piston
1
17
steel ball C5
1
39
plastic retainer ring
50×44×2
1
18
hexagon socket set
screw M6×6
1
40
o-ring 43×3.5
1
19
pump body
1
41
spring
1
20
plastic retainer ring
11×7×2
1
42
cover
1
21
steel ball C6
1
43
retainer ring
1
22
steel ball C4
1