Be sure to read this installation manual thoroughly prior to installation and making connections. If installation methods or non-standard parts not specified in this installation manual are used, accidents or injury may result. Professional installation is recommended, contact the place of purchase ...
- 2 - components components check that all of the following components are present check that all of the following components are present gps antenna components gps antenna x 1 14 waterproof cushion x 1 15 ground plate x 1 16 body protective sheet x 1 17 interconnecting cable (speed pulse, parking, ...
- 3 - warnings and caution signs, illustrated bellow, are posted throughout this manual as well as on the avn7000. They show safe and correct ways to handle the product to prevent personal injury to you and others and avoid damage to property. Before reading through the manual, take time to read thr...
- 4 - • • when routing cables, use precautions to prevent contact of sharp metal parts such as brackets or screw tips. Otherwise, a short circuit, electric shock, fire, or accident may result. • • play the audio at a moderate volume level that permits you to hear sounds from outside the vehicle. Dri...
- 5 - installation diag installation diag r r am am gps antenna (when installing inside the vehicle) 14 gps antenna (when installing outside the vehicle) 14 • • if installing the gps antenna inside the vehicle, the location and the slope of the vehicle's windshield will determine the accuracy of the...
- 6 - • • never cut the insulation on the power cable or use it to power any other equipment. If the rated current capacity of the power cable is exceeded, fire and electric shocks may result. • • the cables should be secured with tape or a similar securing method to prevent any obstructions while d...
- 7 - b+ (yellow) connect where power is constantly available, regardless of the ignition key's position. Acc (red) connect where the power comes on when the ignition is in the acc position. Illumination power supply (orange/white) connect to where power comes on when the vehicle light switch is tur...
- 8 - navi-voice output terminal connect to the navi-voice input terminal of an external device such as a dcu105 (sold separately). Digital output terminal connect to the digital input terminal of an external device such as a dcu105 (sold separately). Vtr input terminals connect the output cable of ...
- 9 - vehicle component adapter cable vehicle harness from main unit - example of using vehicle adapter cables - - vehicle connections - • • you will need to purchase the necessary component adapter cable for the vehicle so that the power supplies can be utilized. (contact the dealer for further det...
- 10 - notes on installation • • check the vehicle speed pulse signal, parking brake signal, and reverse signal carefully before making the connections. If the cables are incorrectly connected, accidents or problems with correct operation may result. • • the label on the vehicle speed pulse signal c...
Route the parking brake signal cable to the main unit. - 11 - foot-operated parking brake hand-operated parking brake - a connecting the point for parking brake (example) - attach a splicing connector at this location. Reverse signal cable reverse lamp reverse signal cable - a connecting point for t...
- 12 - main unit 1 16p gps antenna to ground to acc (power supply) red to head light switch (illumination (+) ) orange/white to power antenna relay (supply) blue to turn-on lead of each unit (supply) blue/white to battery+12v (permanent supply) yellow h/a mute tel mute light green digital output red...
- 13 - to ground ground cable (supplied with tvr105) tv antenna (supplied with tvr105) tv antenna (supplied with tvr105) to ground 5p 12p 5p 6p from external video equipment (remove cap when using extenal video equipment) to ground to ground antenna selector (supplied with tvr105) to ground digital ...
- 14 - system connection e system connection e xample xample main unit 1 bec105 (sold separately) no connection (do not remove cap) 16p gps antenna to ground to acc (power supply) red to head light switch (illumination (+) ) orange/white to power antenna relay (supply) blue to turn-on lead of each u...
- 15 - to ground ground cable tv antenna (supplied with tvr105) tv antenna (supplied with tvr105) to ground 5p 12p 5p 6p from external video equipment (remove cap when using extenal video equipment) to ground to ground antenna selector (supplied with tvr105) to ground digital out (do not remove cap)...
- 16 - tip installing the gps antenna installing the gps antenna notes on installation • • do not install the antenna in places (such as front pillars and roof panel) that are shielded from the sky. • • the gps antenna should be installed in a level position where the signals will be as unobstructed...
- 17 - - installation inside the vehicle (example) - choose an installation location on the dashboard which is flat and has a clear view of the sky. 1 install the ground plate to the dashboard. 2 install the gps antenna to the ground plate. 3 ground plate 16 secure the gps antenna cable with clamps....
- 18 - - installation outside the vehicle (example) - choose an installation location where the gps antenna can be attached securely. 1 remove the backing paper from the body protective sheet and attach the sheet to the vehicle. 2 install the gps antenna on top of the body protective sheet. 3 body p...
- 19 - installing the main unit installing the main unit 30˚ or less level (reference) front - installation angle - caution label caution - installation preparation- to maintain proper function, the unit must be mounted less than 30 degrees. If the angle is in excess of 30 degrees, dvd/cd skipping a...
- 20 - 090003-28540700 0508de (cn) “eclipse” is a registered trademark of fujitsu ten limited in 48 countries including the u.S. And japan. Remove the pocket and any other accessories from the center cluster to make room for the main unit. 1 remove the mounting brackets for the pocket. 2 mounting bo...
