Eclipse AVN8826 Installation Manual

Other manuals for AVN8826: User Manual

Summary of AVN8826

  • Page 1

    English e nglish e nglish e nglish e nglish e nglish english be sure to read this installation manual thoroughly before carrying out installation and making connections. If installation methods or non-standard parts that are not specified in this installation manual are used, accidents or injury may...

  • Page 2: English

    - 2 - english english e nglish e nglish e nglish e nglish e nglish gps antenna components gps antenna x 1 14 waterproof cushion x 1 15 earth plate x 1 16 body protective sheet x 1 17 interconnecting cable (speed pulse, parking, reverse,video, etc) (20p) x 1 3 main unit x 1 1 when installing the main...

  • Page 3: English

    - 3 - english e nglish e nglish e nglish e nglish e nglish english warnings and caution signs, illustrated bellow, are posted throughout this manual as well as on the avn8826. They show safe and correct ways to handle the product so as to prevent personal injury to you and others and avoid damage to...

  • Page 4: English

    English english e nglish e nglish e nglish e nglish e nglish - 4 - • • never cut the insulation on the power cable or use it to power any other equipment. If the rated current capacity of the power cable is exceeded, fire and electric shocks may result. • • the cables should be secured with tape or ...

  • Page 5: English

    - 5 - english e nglish e nglish e nglish e nglish e nglish english antenna power supply (blue) connect to the automatic-antenna control terminal of the vehicle. Control power supply (blue/white) connect the control terminal for the external amplifier, etc. Vehicle speed pulse signal wire (purple/whi...

  • Page 6: English

    - 6 - english english e nglish e nglish e nglish e nglish e nglish notes on installation • • check the vehicle speed pulse signal, parking brake signal, and reverse signal carefully before making the connections. If the cables are incorrectly connected, accidents or problems with correct operation m...

  • Page 7: English

    - 7 - english e nglish e nglish e nglish e nglish e nglish english attach a splicing connector at this location reverse signal cable reverse lamp reverse signal cable - connecting point for the reverse signal (example) - • • be sure to connect the reverse signal cable. If it is not connected, the ve...

  • Page 8: English

    - 8 - english english e nglish e nglish e nglish e nglish e nglish • • never cut the insulation on the power cable or use it to power any other equipment. If the rated current capacity of the power cable is exceeded, fire and electric shocks may result. • • the cables should be secured with tape or ...

  • Page 9: English

    - 9 - english e nglish e nglish e nglish e nglish e nglish english tip notes on installation • • do not install the antenna in places (such as front pillars and roof panel) that are shielded from the sky. • • the gps antenna should be installed in a level position where the signals will be as unobst...

  • Page 10: English

    - 10 - english english e nglish e nglish e nglish e nglish e nglish - installation outside the vehicle (example) - choose an installation location where the gps antenna can be attached securely. 1 remove the backing paper from the body protective sheet and attach the sheet to the vehicle. 2 install ...

  • Page 11: Tip

    30˚ or less level (reference) front - installation angle - - installation preparation- to maintain proper function, the unit must be mounted less than 30 degrees. If the angle is in excess of 30 degrees, dvd/cd skipping and improper dvd/cd and memory stick ejection may occur. Tip before the main uni...

  • Page 12: English

    - 12 - english english e nglish e nglish e nglish e nglish e nglish remove the pocket and any other accessories from the centre cluster to make room for the main unit. 1 remove the mounting brackets for the pocket. 2 mounting bolts pocket, etc centre cluster panel attach the brackets to the main uni...