Eclipse CB1 Installation Manual - Anese
Other manuals for CB1:
Brochure
Manual is about: CEILING BRACKET
of
12
– 10 –
JA
P
ANESE
ENGLISH
G
ERMAN
F
RENCH
IT
ALIAN
S
P
ANISH
Wire
3
Securely install the speaker to the bracket by using the
stubby screwdriver to tighten the screws.
21
Speaker
Bracket
2
Install the drop-prevention wire to the ceiling.
22
Screw X4
4
Install the drop-prevention wire to the ceiling in a place
it can reach which is strong, such as a beam location.
Install the drop-prevention wire securely to the ceiling so
that the speaker will not fall down.
Speaker
Screws
(sold separately)
•
• The speaker can be adjusted to within 10° on each
side by loosening the screws.
•
• When adjusting the direction of the speaker, only
loosen the screws. They should never be removed. If
all of the screws are removed, the speaker may fall
down.
Stubby screwdriver