Eco-Smart ATI-HPE-PD Owner's Manual - Caution:
- 8 -
4. Insert the ESP filters back into the unit.
NOTE: The product may experience some discoloration on ESP filters over time.
This is normal and does not affect the performance of the product in any way.
CLEANING AND MAINTENANCE THE UNIT
1. The unit should be checked at least once every week and the pre-filter should be
cleaned every week. More frequent cleaning may be required depending upon
environmental conditions.
2. Clean the pre-filter as REMOVING/CLEANING/INSTALLING PRE-FILTERS.
3. Clean the ESP filters every 2-3 weeks as REMOVING/CLEANING/
INSTALLING ESP FILTERS.
4. If ESP Reset Indicator illuminates, you need to turn off the unit and unplug it,
then check or clean the ESP filters as REMOVING/CLEANING/
INSTALLING ESP FILTERS.
5. Use a clean, dry, soft cloth to wipe the external surface of unit.
NOTE: Do not stick any foreign objects or your fingers inside the unit.
CAUTION:
Do not use gasoline, benzine, thinner, harsh cleaners, etc., as
they will damage the product. NEVER use ALCOHOL OR SOLVENTS.
SAFETY FEATURE
1. A thermal overload protector is built in to prevent overheating.
2. When an overheat temperature is reached, the product will be automatically shut
off. It can only resume operation when the user resets the unit.
To Reset Heater:
1. Unplug the unit and wait 10 minutes for the heater to cool down.
2. After the heater has cooled down, plug the unit into an exact AC electrical outlet
and follow the operation instructions described in this manual.