ECO Spot LED C25 User Manual - page 3
of
4
ECO Spot LED C25 User Manual
Copyright © 2017 Globus New Media LLC
Page 3
Gobo Placement (see Specifications for Gobo Dimensions)
The projector uses E-Size gobos. See the Specifications for exact dimensions.
•
Unscrew the thumbscrews to remove the front cover with the projection lens.
•
Push the two pins of the gobo retaining ring together and pull out the retaining
ring. Carefully remove the old gobo and replace it with the new gobo.
•
If you have a glass gobo, place the more reflective side towards the light bulb.
•
Replace the retaining ring and make sure it evenly pushes the gobo all the way
back.
•
Replace the front cover and adjust the focus by screwing the projection lens in or
out.