Eco Stage TOP User Manual - page 2
1.
Auto running mode
This mode is Auto Running mode; when press MODE / UP / DOWN, the fixture will automatically run the
programs according to the preset program
2.
Built-in Program mode
1)
This mode is Built-in Program mode.
There are 10 built-in program modes; You could press “UP”
or “DOWN”.
2)
When choose
~
,press “SETUP” at first time can enter Built-in Program mode to set speed.
Press “UP” and “DOWN” to change the value 1-100. Press “SETUP” at second time can enter strobe speed
setting. Press “UP” and “DOWN” to change the value 0-99.
3)
When choose
can enter static color mode, press “UP” and “DOWN” can choose thirty-five type of
colors. Press “SETUP” again can set strobe value of color 0-99.
3.
Static color mode
1)
When press “MODE / UP / DOWN” to choose “MANUAL” can enter built in program setting mode. Press
“UP” and “DOWN” to choose “DIMMER MODE”. Press “SETUP” to enter effect dimming program.
submenu
value
function
Red
Gray:
0-255
R dimming effect 0-100%
Green
Gray:
0-255
G dimming effect 0-100%
Blue
Gray:
0-255
B dimming effect 0-100%
White
Gray:
0-255
W dimming effect 0-100%
Flash
0-99
Strobe effect speed setting
2)
Press “UP” and “DOWN” to choose “BACK DIMMER MODE”. Press “SETUP” to enter backlight dimming
program.
submenu
value
function
B Red
Gray:
0-255
R dimming backlight 0-100%
B Green
Gray:
0-255
G dimming backlight 0-100%
B Blue
Gray:
0-255
B dimming backlight 0-100%
Flash
0-99
Backlight strobe speed setting
3)
Press “UP” and “DOWN” to choose “ZOOM MODE”. Press “SETUP” to enter lens setting program.
submenu
value
function