Ecoair ECODC202 User Manual - Maintenance
MAINTENANCE
Cleaning the unit
1. Turn off the unit, wait for the fan to stop and
unplug from the power socket.
2. Clean the surface with a soft damp cloth.
3. Dry thoroughly with a tower after cleaning.
4. In order to avoid damage, do not wash the
machine with water, or let water drip into the
air inlet or outlet.
1. Turn off the unit and remove the filter from the unit.
2. Clean the Silver Nano Filter only with a vacuum cleaner.
(Washing with water will weaken the germicidal effect of the filter)
3. Refit the filter.
Before storing
1. Run the unit with Purify mode for at least an hour to dry the inside.
2. Switch off and unplug.
3. Clean and dry the bucket.
4. Clean the filter and the unit. Cover the unit to prevent it from gathering dust.
5. Store upright in a cool dry place. Do not expose to direct sunlight.
How to Clean
Cleaning the filter
If the filter is covered with dust, the airflow and the performance
of the unit will be affected. Check the filter periodically to ensure
any dust is removed (It is recommended to check and clean the
air filter every 2 weeks or an appropriate frequency depending on
your usage and air environment).
1. Switch unit off and remove filter from the back.
2. Do not wash 3-in-1 Filter(2). It should be replaced after 3 to 6 months use.
3. Contact your dealer to obtain new filters.
Silver Nano Filter
3-in-1 (antiallergic, de-odour, charcoal) Filter
Replacing the deodorizing charcoal filter
10
1
2