Ecom CN Operating Instructions Manual - 4.5. Soot...Oil Trace
Page 12
ecom-CN
4.5. Soot...Oil trace
In the sub-menu
"Soot.Oil deriv."
the measurement values for boil-
er temperature, soot dot number and oil trace can be inputted.
Select the corresponding line on the display and press
to acti-
vate the input. The input for boiler temperature and soot dots 1-9 can
occur one after the other using the instrument keyboard. Press
to take over the value in the measurement data record. The
result of the oil trace determination can be documented as follows:
- Place cursor on line
"Oil trace"
- Use
to adjust result
(
"No", "Yes" or "- - - "
)
Once all necessary inputs have been made, press
to quit the
menu. The measurement is complete.
5.6. Record and print measurement
Press
(printer symbol) to access
the printing menu. If need be, the recorded
values can be checked again (
„Look at“
,
and scroll with the cursor keys).
If all data are correct, press
„Record -> M“
and
to transfer in the internal
memory. A successful transfer is character-
ized by a
"M"
on the upper right part of the
display.
After the gas analysis, please transfer the recorded
data (intermediate memory) into the internal
instrument memory otherwise the values will get
lost by instrument switch-off!
Soot.Oil deriv.
T. Boiler
--- °C
1. Soot meas. ---
2. Soot meas. ---
3. Soot meas. ---
Oil trace
---
Look at
Store to memory
Select with
↑↓
!
Look at
Store to memory
Select with
↑↓
!
M