Ecom EN2-F Quick Manual - page 6
Page 6
Analyzer Start-up
Press the red power button to turn on
the analyzer. The main menu is dis-
played with 6 (or 7) menu options:
- Gas analysis
: Perform gas analysis
- Averaging
: Perform averaging test
- Soot test
: Perform soot test/smoke dot test
- Data processing :
Save snapshots to internal memory or perform
data logging (only displays if MM card is inserted)
- Adjustments
: Modify instrument settings
- Control
: Check operation state of instrument
- Diagnostics
: Only used with ECOM AK tool
To perform measurements, select
Gas analysis
and confirm with
. The instrument starts a 1- minute auto-zero phase and the
fuel types selection list is displayed. The following fuel types are
available:
Natural gas
Propane
Butane
Number 2 oil
Number 4 oil
Number 6 oil
Coal
Wood
North Sea gas
Diesel oil
Fuel type
Natural gas
CO2max A1 B
11.7 0.37 0.009
Select:
Gas analysis
Averaging
Soot Test
Data Processing
Adjustments
Control
The probe must be in fresh air
when you start the analyzer!