Summary of Ex-Time 40
Page 1
Ex-time 40/50 operating instructions.
Page 2
12 contents 1. Introduction 13 2. Safety advice 13 3. Faults and damage 13 4. Safety regulations 14 5. Ex-data 14 6. Technical data 15 6.1 table with type-tested batteries 15 7. Use and application / operating instructions 16 7.1 commissioning 16 7.2 changing the battery 16 7.3 wall mounting 17 7.4 ...
Page 3
13 note: the current operating instructions, ec declaration of conformity and the ex-certificate are available for download from the relevant product page under www.Ecom-ex.Com, or alternatively they can be reque- sted directly from the manufacturer. 1. Introduction the ex-time 40 and the ex-time 50...
Page 4
14 - external damage is evident on the housing. - the unit has been subjected to excessive loads for which it is not designed. - incorrect storage of the unit. - damage sustained in transit. - correct certification is illegible. - functionality errors occur. - permitted tolerances or threshold value...
Page 5
15 report job identification no.: 3015562 fm identification: i.S. Class i division 1 group a-d t4 intrinsically safe for use in a class i, division 1, groups a, b, c & d with a temperature class of t4 hazardous (classified) locations. 6. Technical data ambient temperature ta: 0°c ... +50°c storage t...
Page 6
16 7. Use and application / operating instructions before use, please read these operating instructions very carefully in order to familiarise yourself with the functions of the ex-time 40 / ex-time 50. For you own safety and information, please read the follo- wing instructions. 7.1 commissioning u...
Page 7
17 7.3 wall mounting an integral metal bracket located on the rear of the clock enables the ex-time 40 / ex-time 50 to be suitably mounted on an appropriate wall. The fixing of the unit must be secure at all times and precautiona- ry measures must be taken to prevent the ex-time 40 / 50 from falling...
Page 8
18 11. Guarantee and liability as per the general terms and conditions of business, ecom instruments gmbh offers a 2-year warranty for the functioning and materials of this product under the specified operating and maintenance conditions. This does not cover all wearing parts (e.G. Batteries and lam...
Page 9
19 13. Ec type examination certificate physikalisch-technische bundesanstalt braunschweig und berlin (1) ec-type-examination certificate (2) equipment and protective systems intended for use in potentially explosive atmospheres – directive 94/9/ec (3) ec-type-examination certificate number ptb 02 at...
Page 10
(13) s c h e d u l e (14) ec-type-examination certificate ptb 02 atex 2197 x (15) device description the explosion-proof wall clock, type ex-time ** can be used in potentially explosive atmospheres. The admissible ambient temperature range is 0°c - 50°c. Electrical data auxiliary power.................
Page 11
21 physikalisch-technische bundesanstalt baunschweig und berlin 1st amendment in accordance with directive 94/9/ec, appendix iii number 6 to ec type approval test certificate ptb 02 atex 2197 x device: explosion-protected wall clock ex-time ** designation: ii 2 g eex ia iic t4 manufacturer: ecom ins...
Page 12
22 physikalisch-technische bundesanstalt braunschweig und berlin 2nd amendment in accordance with directive 94/9/ec, appendix iii number 6 to ec type approval test certificate ptb 02 atex 2197 x device: explosion-protected wall clock ex-time ** designation: ii 2 g ex ia iic t4 manufacturer: ecom ins...
Page 13
23 14. Certificate of compliance.
Page 14
24.
Page 15
Ecom instruments gmbh ·industriestr. 2 · 97959 assamstadt · germany tel.: + 49 (0) 62 94 / 42 24 0 · fax: + 49 (0) 62 94 / 42 24 100 e-mail: sales@ecom-ex.Com · www.Ecom-ex.Com pa000187 / 500 / 12/09 weee-reg.-nr. De 934 99306 1820/1830al01a02 12/09 Änderungen vorbehalten! Subject to change without ...