Ex-time 40/50 operating instructions.
12 contents 1. Introduction 13 2. Safety advice 13 3. Faults and damage 13 4. Safety regulations 14 5. Ex-data 14 6. Technical data 15 6.1 table with type-tested batteries 15 7. Use and application / operating instructions 16 7.1 commissioning 16 7.2 changing the battery 16 7.3 wall mounting 17 7.4 ...
13 note: the current operating instructions, ec declaration of conformity and the ex-certificate are available for download from the relevant product page under www.Ecom-ex.Com, or alternatively they can be reque- sted directly from the manufacturer. 1. Introduction the ex-time 40 and the ex-time 50...
14 - external damage is evident on the housing. - the unit has been subjected to excessive loads for which it is not designed. - incorrect storage of the unit. - damage sustained in transit. - correct certification is illegible. - functionality errors occur. - permitted tolerances or threshold value...
15 report job identification no.: 3015562 fm identification: i.S. Class i division 1 group a-d t4 intrinsically safe for use in a class i, division 1, groups a, b, c & d with a temperature class of t4 hazardous (classified) locations. 6. Technical data ambient temperature ta: 0°c ... +50°c storage t...
16 7. Use and application / operating instructions before use, please read these operating instructions very carefully in order to familiarise yourself with the functions of the ex-time 40 / ex-time 50. For you own safety and information, please read the follo- wing instructions. 7.1 commissioning u...
17 7.3 wall mounting an integral metal bracket located on the rear of the clock enables the ex-time 40 / ex-time 50 to be suitably mounted on an appropriate wall. The fixing of the unit must be secure at all times and precautiona- ry measures must be taken to prevent the ex-time 40 / 50 from falling...
18 11. Guarantee and liability as per the general terms and conditions of business, ecom instruments gmbh offers a 2-year warranty for the functioning and materials of this product under the specified operating and maintenance conditions. This does not cover all wearing parts (e.G. Batteries and lam...
19 13. Ec type examination certificate physikalisch-technische bundesanstalt braunschweig und berlin (1) ec-type-examination certificate (2) equipment and protective systems intended for use in potentially explosive atmospheres – directive 94/9/ec (3) ec-type-examination certificate number ptb 02 at...
(13) s c h e d u l e (14) ec-type-examination certificate ptb 02 atex 2197 x (15) device description the explosion-proof wall clock, type ex-time ** can be used in potentially explosive atmospheres. The admissible ambient temperature range is 0°c - 50°c. Electrical data auxiliary power.................
21 physikalisch-technische bundesanstalt baunschweig und berlin 1st amendment in accordance with directive 94/9/ec, appendix iii number 6 to ec type approval test certificate ptb 02 atex 2197 x device: explosion-protected wall clock ex-time ** designation: ii 2 g eex ia iic t4 manufacturer: ecom ins...
22 physikalisch-technische bundesanstalt braunschweig und berlin 2nd amendment in accordance with directive 94/9/ec, appendix iii number 6 to ec type approval test certificate ptb 02 atex 2197 x device: explosion-protected wall clock ex-time ** designation: ii 2 g ex ia iic t4 manufacturer: ecom ins...
23 14. Certificate of compliance.
24.
Ecom instruments gmbh ·industriestr. 2 · 97959 assamstadt · germany tel.: + 49 (0) 62 94 / 42 24 0 · fax: + 49 (0) 62 94 / 42 24 100 e-mail: sales@ecom-ex.Com · www.Ecom-ex.Com pa000187 / 500 / 12/09 weee-reg.-nr. De 934 99306 1820/1830al01a02 12/09 Änderungen vorbehalten! Subject to change without ...