2 all documentation and available software for the loc-ex 01 / loc 01 ** can be found as download (please use the link below): https://www.Ecom-ex.Com/application_engineering/public/loc-ex_01/ additional languages can be downloaded from the relevant product page at www. Ecom-ex.Com..
3 1. Scope of delivery 1 x loc 01 development board 1 x cc debugger 1 x mini usb cable 1 x 10 pin flat cable with 2x5 1,27mm connector 1 x converter board 2,54mm- 1,27mm connector 2. Installing drivers the required usb drivers for the tool, are listed below: • bleupdate-1.3.6 (tool for flashing the ...
4 !Please use the blue giga / silabs tools for firmware flashing because blue giga is using an own scripting language which is not fully compatible with ti´s c language. 3. How to connect the debugger with the development board 1. Connect the debugger with the converter board 2,54mm- 1,27mm connecto...
5 when pressing on “info” the ble chip will be detected and the message below will be shown: press the “browse” button and choose the requested .Bgproj file for the firmware upgrade: press “update”: the upgrade procedure will start. After the update has been finished you will be informed if the upda...
6 5. Troubleshooting usb drivers: if windows will not find the drivers automatically during the installation of “ble- update.Exe” additional usb drivers can be found here (please use link below): • https://www.Ecom-ex.Com/application_engineering/public/loc-ex_01/debug- ger/usb%20driver/ bg build fil...
7.
8 copyright © 2016 ecom instruments gmbh. Der inhalt dieses dokuments darf ohne vorherige schriftliche genehmigung durch die ecom instruments gmbh in keiner form, weder ganz noch teilweise vervielfältigt, weitergegeben, verbreitet oder gespeichert werden. Der inhalt dieses dokuments wird so präsenti...
