Economy Radiator ELECTRIC RADIATOR User Manual - -- : --
User Manual 2013 V1
Page 12
PROGRAMMING MANUALLY USING THE 3 PRE-SET PROGRAMS
Plug your radiator in at the w all and sw itch on at the back behind the control panel, (it
may already be on) your screen w ill now be flashing. Press any button and your screen
w ill look like any of these pictures (ignore the temperatures).
-- : --
35°
15°
Short press the
/P
button to put the radiator into standby mode. Your screen should now
look like this.
-- : --
Press and hold the
/P
button dow n for approximately 7 seconds until the screen show s
0:00. There w ill be a row of small black boxes along the top of the screen (each one
represents an hour of the day), and there w ill be the numbers 1 to 7 dow n the right hand
side of the screen (these represent the days of the w eek).
SHORT PRESS
/P
AGAIN
-- : --
1
2
3
4
5
6
7
Use the
+
or
-
button to select the current day of the w eek (1= Monday, 2 = Tuesday etc)
and press
m /ok
to confirm. This is a 24 hour clock. This w ill now move onto the hour, so
again; use the
+
or
-
button to change to the current hour and then
m /ok
to confirm.
Lastly it w ill move onto the minutes. Use the
+
or
-
button to change to the correct time
and press
m /ok
to confirm.
The set time is now on the screen. This is standby mode.
If you now short press
/P
to sw itch the radiator back on.
Now keep short pressing the
m /ok
again to take you betw een PRO1, PRO2 and PRO3
(w hichever you want to use).
Leave for a couple of seconds then your screen should be flashing betw een the program
and your temperature. There is nothing more that you need to do.