EcoQuest Eagle 2500 Owner's Manual - Ozone Plate Installation
5
OZONE PLATE INSTALLATION
The Eagle 2500 utilizes three glass ozone plates.
1. Rotate the lint screen retainers out of the way.
2. Remove the rear lint screen.
3. After detemining the square footage, use
the purifier chart to determine the correct
number of plates to install.
4. Fully insert the needed ozone plates (a,b,c)
between the guide-grooves in the top and
bottom of the plate cage (between the posts
and clips) making sure the metal clip on each
side of the plate is in contact with the metal
screen on the plate.
5. Re-install lint screen as shown below.
LINT SCREEN INSTALLATION
1. Always install bottom of lint screen first.
2. The white lint screen tab should depress the
safety switch arm towards the front of unit.
3. Fit top of lint screen into
cabinet.
Unit will not operate
if safety switch is not
depressed.
4. Secure with lint
screen retainers.
Lint
Screen
Tab
1
2
3
1
2,3
4